LTC3 Charge Controller
psas·launch-tower·ltc3/kicad/charge_controller/LTC3_Charge_Controller.kicad_pcb
About the LTC3 Charge Controller PCB
LTC3 Charge Controller is an open source PCB design by psas, published on GitHub. It is a 4-layer board measuring 103.5 × 85 mm, with 110 components from 69 distinct parts.
Other key parts include the PI2127, LT8490, LTC2990 and 4N25. By type, the board carries 49 resistors, 37 capacitors, 7 transistors, 5 ICs, 5 connectors and 5 diodes.
From the project
CAD files and software for the launch tower computer (LTC)
This subdirectory contains everything related to the third generation launch tower computer (LTC3), with the exception of the userspace software, which is contained in the [launch-tower-comm][1] repo.
[1]: https://github.com/psas/launch-tower-comm
For a quick introduction to the project, read the [Requirements doc][2] at ./doc/requirements/LTC3RequirementsSpec.adoc
Main components on the LTC3 Charge Controller
LTC3 Charge Controller bill of materials (BOM)
110 components, 69 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PI2127 | LGA-17 | U1, U2 |
| 1 | LT8490 | LT8490 | U3 |
| 1 | LTC2990 | MSOP-10 | U4 |
| 1 | 4N25 | DIP-6_W7.62mm | U5 |
| 1 | ZVN4525E6 | SOT-26 | Q1 |
| 4 | BSC028N06NS | SO-8 | Q2, Q3, Q4, Q5 |
| 1 | ZVP3310F | SOT-23 | Q6 |
| 1 | MMBT5550L | SOT-23 | Q7 |
| 1 | CONN_01X08 | Molex_Microfit3_Header_02x04_Straight_43045-0828 | P1 |
| 1 | Molex MicroFit | Molex_Microfit3_Header_02x02_Straight_43045-0428 | P2 |
| 1 | XH header | JST_XH_B02B-XH-A_02x2.50mm_Straight | P3 |
| 1 | XH header | JST_EH_B02B-EH-A_02x2.50mm_Straight | P5 |
| 1 | XH header | JST_EH_B04B-EH-A_04x2.50mm_Straight | P6 |
| 1 | 15A | Fuseholder_Auto_Blade_Regular_Keystone_3557-2 | F1 |
| 2 | CMMR1U-02 | SOD-123 | D1, D2 |
| 1 | GREEN | LED_1206 | D3 |
| 1 | RED | LED_1206 | D4 |
| 1 | BZT52C13 | SOD-123 | D5 |
| 1 | 10uH | Coilcraft_SER2900 | L1 |
| 1 | 0.33μ | C_0805 | C1 |
Show 49 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 33μ | c_elec_10x10 | C2, C4, C5 |
| 5 | 0.1μ | C_0805 | C3, C26, C31, C34, C37 |
| 3 | 4.7μ | C_0805 | C6, C7, C24 |
| 2 | 0.01μ | C_0805 | C8, C10 |
| 6 | 2.2μ | C_1210 | C9, C11, C12, C14, C20, C21 |
| 2 | 220n | C_0805 | C13, C15 |
| 1 | 8.2n | C_0805 | C16 |
| 1 | 220p | C_0805 | C17 |
| 2 | 470n | C_0805 | C18, C32 |
| 1 | 68n | C_0805 | C19 |
| 2 | 0.001μ | C_0805 | C22, C23 |
| 2 | 1μ | C_0805 | C25, C30 |
| 1 | 0.18μ | C_0805 | C27 |
| 2 | 4.7μ | C_2220 | C28, C29 |
| 2 | 10μ | c_elec_6.3x7.7 | C33, C35 |
| 1 | 150μ | C_Radial_D12.5_L25_P5 | C36 |
| 1 | 110k | R_0805 | R1 |
| 1 | 35.7k | R_0805 | R2 |
| 3 | 10k | R_0805 | R3, R4, R19 |
| 4 | 0 | R_0805 | R5, R6, R48, R49 |
| 1 | 93.1k | R_0805 | R7 |
| 1 | 7.68k | R_0805 | R8 |
| 1 | 196k | R_0805 | R9 |
| 1 | 8.06k | R_0805 | R10 |
| 1 | 16.5k | R_0805 | R11 |
| 2 | 3.32k | R_0805 | R12, R27 |
| 1 | 215k | R_0805 | R13 |
| 1 | 21k | R_0805 | R14 |
| 3 | 0 | R_0603 | R15, R25, R34 |
| 1 | 25.5k | R_0805 | R16 |
| 1 | 3.01k | R_0805 | R17 |
| 1 | 243k | R_0805 | R18 |
| 2 | 10m | R_1206 | R20, R38 |
| 4 | 10 | R_0805 | R21, R28, R29, R39 |
| 1 | 53.6k | R_0805 | R22 |
| 2 | 549 | R_0805 | R23, R24 |
| 1 | 1.3k | R_0805 | R26 |
| 1 | 200k | R_0805 | R30 |
| 1 | 5m | R_1206 | R31 |
| 2 | 11.5k | R_0805 | R32, R33 |
| 1 | 57.6k | R_0805 | R35 |
| 1 | 294k | R_0805 | R36 |
| 1 | 10.2k | R_0805 | R37 |
| 1 | 100k | R_0805 | R40 |
| 1 | 26.1k | R_0805 | R41 |
| 1 | 60m | R_2512 | R42 |
| 2 | 75k | R_0805 | R43, R45 |
| 2 | 12k | R_0805 | R44, R46 |
| 1 | TBD | R_0805 | R47 |
LTC3 Charge Controller design files
The KiCad project lives in the psas/launch-tower repository on GitHub; these links point at the commit this page was built from.
LTC3 Charge Controller: common questions
How big is the LTC3 Charge Controller PCB?
The LTC3 Charge Controller measures 103.5 × 85 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the LTC3 Charge Controller?
110 components, from 69 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LTC3 Charge Controller design files?
From the psas/launch-tower repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the LTC3 Charge Controller design in my own project?
The repository has no license, so all rights stay with psas. Use it as a reference, and ask the author before reusing the design.