HardLabs

Driveramp

psu-meteo·SuperDARN_Transmitter·driveramp/driveramp.kicad_pcb

Driveramp PCB layout, top view — open source board by psu-meteo

About the Driveramp PCB

Driveramp is an open source PCB design by psu-meteo, published on GitHub under the MIT license. It is a 2-layer board measuring 108.7 × 79.3 mm, with 80 components from 36 distinct parts.

Other key parts include the ISL43210A, MRFE6VP100H, LM317HV, 7321MF and TQP369185. By type, the board carries 38 capacitors, 17 resistors, 6 ICs, 4 inductors, 3 connectors and 2 relays.

From the project

SuperDARN_Transmitter =====================

Main components on the Driveramp

ISL43210AMRFE6VP100HLM317HV7321MFTQP369185BA08CC0WFP

Driveramp bill of materials (BOM)

80 components, 36 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ISL43210A
U1
1
MRFE6VP100H
U2
1
LM317HV
U3
1
7321MF
U4
1
TQP369185
U5
1
BA08CC0WFP
U6
1
BC547BTA
Q1
2
SMA
J1, J2
1
CONN_2
P2
3
FIDUCIAL
FID1, FID2, FID3
1
SMD_HDR
JP1
2
SMD_HDR
K1, K2
1
200
RV1
1
2843000302
T1
1
2x Fair-Rite 2843006802, coax
T2
1
DIODE
D1
1
LED
D3
4
8.2 uH
L1, L2, L3, L4
12
22 nF
C1, C2, C7, C8, C10, C18, C19, C25 +4
5
100 nF
C3, C12, C13, C36, C40
Show 16 more
QtyPartRefs
2
DNP
C4, C31
5
1 uF
C5, C9, C16, C35, C37
6
56uF
C6, C11, C15, C30, C33, C34
2
1000 pF
C14, C29
2
DNP
C17, C21
3
22 pF
C20, C23, C24
1
10uF
C28
3
1.1k 1%
R1, R9, R11
2
432 1%
R2, R3
4
10k
R4, R5, R8, R14
1
75 1%
R6
1
2.49 ohm, 2 W(RHC2512FT2R49)
R7
2
909 1%
R10, R13
1
5.11k 1%
R12
2
5.1
R15, R16
1
43.2
R17

Driveramp design files

The KiCad project lives in the psu-meteo/SuperDARN_Transmitter repository on GitHub; these links point at the commit this page was built from.

Driveramp: common questions

How big is the Driveramp PCB?

The Driveramp measures 108.7 × 79.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Driveramp?

80 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Driveramp design files?

From the psu-meteo/SuperDARN_Transmitter repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Driveramp design in my own project?

Yes, under the terms of its MIT license, which psu-meteo chose for the repository.

More boards in SuperDARN_Transmitter