MoonratII Heater Board
About the MoonratII Heater Board
MoonratII Heater Board is an open source PCB design by PubInv, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 25.2 × 65 mm, with 12 components from 11 distinct parts.
By type, the board carries 5 connectors, 5 test points, 1 capacitor and 1 resistor.
From the project
Moonrat: A second-generation portable incubator
View both schematic and PCB files with Kicanvas | Description | LINK | Note: | |------------------------- |------------------------------------------------------------------------------------------------- |--- | | Schematic |MoonRatII Schematic | | | PCB |MoonRatII PCB| |
MoonratII Heater Board bill of materials (BOM)
12 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XY308-2.54-3P Screw_Terminal_01x03 Ningbo Xinlaiya Elec. | GeneralPurposeAlarmDevicePCB_282834-3_1x03_P2.54mm_Horizontal | J7 |
| 1 | KF128-2.54-6P Screw_Terminal_01x06 Cixi Kefa Elec | GeneralPurposeAlarmDevicePCB_282834-6_1x02_p254mm_Horizontal | J9 |
| 1 | C5665 Conn_02x05_Odd_Even BOOMELE(Boom Precision Elec) | IDC-Header_2x05_P2.54mm_Vertical | J10 |
| 2 | XY308-2.54-2P Screw_Terminal_01x02 Ningbo Xinlaiya Elec. | GeneralPurposeAlarmDevicePCB_282834-2_1x02_P2.54mm_Horizontal | J11, J12 |
| 1 | RH-5121 +5P ronghe | TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP1 |
| 1 | RH-5121 TP_GND ronghe | TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP2 |
| 1 | RH-5121 TempOut_IB ronghe | TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP3 |
| 1 | RH-5121 HeaterDrive_IB ronghe | TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP4 |
| 1 | RH-5121 VCCQ ronghe | TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded | TP5 |
| 1 | CC0603KRX7R9BB104 0.1uF YAGEO | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | RMC06034K7FN 4K7 TyoHM | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
MoonratII Heater Board design files
The KiCad project lives in the PubInv/moonrat repository on GitHub; these links point at the commit this page was built from.
MoonratII Heater Board: common questions
How big is the MoonratII Heater Board?
The MoonratII Heater Board measures 25.2 × 65 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MoonratII Heater Board?
12 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MoonratII Heater Board design files?
From the PubInv/moonrat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MoonratII Heater Board design in my own project?
Yes, under the terms of its AGPL-3.0 license, which PubInv chose for the repository.
