Ti keyboard
queueRAM·ti_keyboard·schematics/ti_keyboard_silitek/ti_keyboard_silitek.kicad_sch

About the Ti keyboard PCB
Ti keyboard is an open source PCB design by queueRAM, published on GitHub. It is a board, with 38 components from 20 distinct parts.
Other key parts include the IMH8A. By type, the board carries 9 capacitors, 8 resistors, 6 inductors, 4 ICs, 4 connectors and 4 diodes.
It belongs with the keyboards designs in this gallery.
From the project
Reverse engineering TI Keyboard for graphing calculators
There are two hardware models of the TI Keyboard for graphing calculators: one with production codes listed on the back of the format F-MMYY and one without. The ones without contain a PCB branded with Silitek and the ones with TI-KEYBOARD-8. See Teardown of the TI-Keyboard over on the Cemetech forums for pictures and more details about the keyboard matrix.
The two hardware models appear to use the same schematic, with the only exception that the newer TI-KEYBOARD-8 model uses EM78P451S (PDF) instead of EM78P451 (PDF).
Main components on the Ti keyboard
Ti keyboard bill of materials (BOM)
38 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | IMH8A | U1, U3, U4 | |
| 1 | ~ | PQFP-44_10x10mm_P0.8mm | U2 |
| 1 | Conn_01x08 | CN1 | |
| 1 | Conn_01x10 | CN2 | |
| 1 | Graph Link 1 | J1 | |
| 1 | Graph Link 2 | J2 | |
| 1 | 3x 1.5V | BT1 | |
| 1 | Fuse | F1 | |
| 1 | TestPoint | TP1 | |
| 2 | RB471E | D1, D3 | |
| 1 | LED | D2 | |
| 1 | CH461F | SOT-323_SC-70 | D4 |
| 6 | ~ | L1, L2, L3, L4, L5, L6 | |
| 7 | ~ | C1, C2, C5, C6, C7, C9, C10 | |
| 1 | 10µ? | C3 | |
| 1 | 0.1µ? | C4 | |
| 2 | ~ | R1, R2 | |
| 1 | 27k | R3 | |
| 1 | 330 | R4 | |
| 4 | 10k | R5, R6, R7, R8 |
Ti keyboard design files
The KiCad project lives in the queueRAM/ti_keyboard repository on GitHub; these links point at the commit this page was built from.
Ti keyboard: common questions
How many components are on the Ti keyboard?
38 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ti keyboard design files?
From the queueRAM/ti_keyboard repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the Ti keyboard design in my own project?
The repository has no license, so all rights stay with queueRAM. Use it as a reference, and ask the author before reusing the design.
Similar boards
Lily58 Lite Rev3 TOP Case
kata0510
142.5 × 106.4 mm34 parts2LMIT2.3kLily58 Pro BOTTOM
kata0510
142.5 × 106.3 mm5 parts2LMIT2.3kLily58
kata0510
142.5 × 106.3 mm83 parts2LMIT2.3kLily58 Pro
kata0510
142.5 × 106.3 mm83 parts2LMIT2.3kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kPcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k