Me3116 regulator
About the Me3116 regulator PCB
Me3116 regulator is an open source PCB design by R8bert, published on GitHub. It is a 2-layer board measuring 22.1 × 49.6 mm, with 20 components from 16 distinct parts.
Other key parts include the ME3116, INPUT and OUTPUT. By type, the board carries 7 resistors, 4 capacitors, 3 ICs, 2 diodes, 1 transistor and 1 connector.
Main components on the Me3116 regulator
Me3116 regulator bill of materials (BOM)
20 components, 16 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ME3116 | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U1 |
| 1 | INPUT | CONN-TH_P5.00_KF301-5.0-2P | U3 |
| 1 | OUTPUT | CONN-TH_P5.00_KF301-5.0-2P | U4 |
| 1 | AO3400A | SOT-23 | Q1 |
| 1 | Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | GREEN | LED0603-R-RD | LED1 |
| 2 | SS34 | SMA_L4.3-W2.6-LS5.2-RD | D1, D2 |
| 1 | 10uH | IND-SMD_L7.0-W6.6_0630CDMCCDS | L1 |
| 1 | 1uF 25V | C0603 | C1 |
| 1 | 10uF 50V | C1210 | C2 |
| 1 | 22uF 25V | C1210 | C3 |
| 1 | 1uF | C0603 | C4 |
| 3 | R1 | R0603 | R1, R2, R4 |
| 1 | 1M | R0603 | R3 |
| 2 | 10K | R0603 | R5, R6 |
| 1 | 100k | R0603 | R7 |
Me3116 regulator design files
The KiCad project lives in the R8bert/DC-DC-Regulators repository on GitHub; these links point at the commit this page was built from.
Me3116 regulator: common questions
How big is the Me3116 regulator PCB?
The Me3116 regulator measures 22.1 × 49.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Me3116 regulator?
20 components, from 16 distinct parts. The full bill of materials is listed on this page.
Where can I download the Me3116 regulator design files?
From the R8bert/DC-DC-Regulators repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Me3116 regulator design in my own project?
The repository has no license, so all rights stay with R8bert. Use it as a reference, and ask the author before reusing the design.
