LrTMAX.4lpb
remov-b4-flight·LrTMAX.4lpb
About the LrTMAX.4lpb PCB
LrTMAX.4lpb is an open source STM32 PCB design by remov-b4-flight, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 100 × 100 mm, with 122 components from 26 distinct parts.
Its main chip is the STM32F072C8TX-MCU_ST_STM32F0, from the STM32 family. Other key parts include the OLED-0.91 and LDK130-08_SOT23_SOT353-REGULATOR_LINEAR. By type, the board carries 42 capacitors, 31 resistors, 25 diodes, 17 switches, 3 ICs and 2 connectors.
From the project
KiCAD project of LrTMAX Print Circuit Board
Main components on the LrTMAX.4lpb
LrTMAX.4lpb bill of materials (BOM)
122 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072C8TX-MCU_ST_STM32F0 STM32F072C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | OLED-0.91 SSD1306_OLED_0.91 | OLED-9.1 | U3 |
| 1 | LDK130-08_SOT23_SOT353-REGULATOR_LINEAR SPX3819M5-L3-3TR | SOT-23-5 | U4 |
| 1 | 2N7002-TRANSISTOR_FET 2N7002 | SOT-23 | Q1 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | CONN_02X05_ODD_EVEN Conn_02x05_Odd_Even | PinHeader_2x05_P1.27mm_Vertical | J2 |
| 8 | SW_PUSH_45DEG-SWITCH Tact_SW_8mm | SW_PUSH_6mm_H9.5mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 |
| 8 | EC11_SMD | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17 |
| 1 | SW_SPST | SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm | SW20 |
| 1 | TestPoint | TestPoint_THTPad_D1.0mm_Drill0.5mm | TP1 |
| 16 | 1N4148W-DIODE 1N4148W | D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +8 |
| 1 | LED0603_BL | LED_0603_1608Metric | D18 |
| 8 | WS2812B-2020 | LED_WS2812B-2020 | D31, D32, D33, D34, D35, D36, D37, D38 |
| 16 | 33N 22n | C_0805_2012Metric | C10, C11, C12, C13, C14, C15, C16, C17 +8 |
| 2 | 100N 100n | C_0805_2012Metric | C30, C55 |
| 8 | 100N 0.1u | C_0805_2012Metric | C31, C32, C33, C34, C35, C36, C37, C38 |
| 5 | 100N 100n | C_0603_1608Metric | C40, C41, C43, C44, C45 |
| 4 | 4.7U 4.7u | C_0805_2012Metric | C42, C46, C51, C52 |
| 7 | 1u | C_0805_2012Metric | C47, C48, C49, C50, C53, C54, C56 |
| 5 | 1K | R_0805_2012Metric | R1, R2, R3, R4, R42 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1K | R_0805_2012Metric | R5, R6 |
| 20 | 10K | R_0805_2012Metric | R7, R10, R11, R12, R13, R14, R15, R16 +12 |
| 1 | 100 | R_0805_2012Metric | R44 |
| 1 | 62 | R_0805_2012Metric | R45 |
| 1 | 1.2K | R_0805_2012Metric | R46 |
| 1 | 470 1K | R_0805_2012Metric | R48 |
LrTMAX.4lpb design files
The KiCad project lives in the remov-b4-flight/LrTMAX.4lpb repository on GitHub; these links point at the commit this page was built from.
- LayoutLrTMAX.kicad_pcb
- SchematicLrTMAX.kicad_sch
- BOMLrTMAX-BOM.csv
LrTMAX.4lpb: common questions
What microcontroller does the LrTMAX.4lpb use?
The LrTMAX.4lpb is built around the STM32F072C8TX-MCU_ST_STM32F0, from the STM32 family.
How big is the LrTMAX.4lpb PCB?
The LrTMAX.4lpb measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the LrTMAX.4lpb?
122 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the LrTMAX.4lpb design files?
From the remov-b4-flight/LrTMAX.4lpb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the LrTMAX.4lpb design in my own project?
Yes, under the terms of its BSD-3-Clause license, which remov-b4-flight chose for the repository.
Can I test firmware for the LrTMAX.4lpb without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k