Mesabob
About the Mesabob PCB
Mesabob is an open source PCB design by rene-dev, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 87.5 × 50 mm, with 44 components from 6 distinct parts.
Other key parts include the rs4854. By type, the board carries 16 resistors, 11 capacitors, 9 connectors and 8 ICs.
It belongs with the robotics & motion and wearables designs in this gallery.
From the project
AC Servo Driver for STM32F4
Build Log: https://travis-ci.org/rene-dev/stmbl
THE AUTHORS OF THIS SOFTWARE ACCEPT ABSOLUTELY NO LIABILITY FOR ANY HARM OR LOSS RESULTING FROM ITS USE. IT IS EXTREMELY UNWISE TO RELY ON SOFTWARE ALONE FOR SAFETY. Any machinery capable of harming persons must have provisions for completely removing power from all motors, etc, before persons enter any danger area. All machinery must be designed to comply with local and national safety codes, and the authors of this software can not, and do not, take any responsibility for such compliance.
Main components on the Mesabob
Mesabob bill of materials (BOM)
44 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | rs4854 | SOIC-8-N | U1, U2, U3, U4, U5, U6, U7, U8 |
| 8 | RJ45 | RJ45_8 | J1, J2, J3, J4, J5, J6, J7, J8 |
| 1 | CONN_02X13 | IDC_Header_Straight_26pins | P1 |
| 8 | 100n | C_0603 | C1, C2, C3, C4, C5, C6, C7, C8 |
| 3 | CP | CP_EIA-2012-12_Kemet-R | C9, C10, C11 |
| 16 | R | R_0603 | R1, R2, R3, R4, R5, R6, R7, R8 +8 |
Mesabob design files
The KiCad project lives in the rene-dev/stmbl repository on GitHub; these links point at the commit this page was built from.
Mesabob: common questions
How big is the Mesabob PCB?
The Mesabob measures 87.5 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mesabob?
44 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mesabob design files?
From the rene-dev/stmbl repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Mesabob design in my own project?
Yes, under the terms of its GPL-3.0 license, which rene-dev chose for the repository.
More boards in stmbl
STM32Stmbl 4.0
100 × 100 mm412 parts2LGPL-3.0979
Bob
100 × 100 mm140 parts2LGPL-3.0979
STM32Stmsp
42 × 42 mm131 parts4LGPL-3.0979
STM32To220 powerstage
99.8 × 74.9 mm125 parts4LGPL-3.0979
STM32Rectifier
100 × 100 mm80 parts2LGPL-3.0979
Trollerv2
100 × 75 mm33 parts4LGPL-3.0979
Powerstep
95.2 × 71.5 mm28 parts4LGPL-3.0979
Triple adapter
57 × 75 mm26 parts2LGPL-3.0979
11ua
57.3 × 19 mm26 parts2LGPL-3.0979
Diff driver
32 × 22 mm14 parts2LGPL-3.0979
Rj45 breakout
15.2 × 53.8 mm3 parts2LGPL-3.0979
Similar boards
LevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2k
View base
81.2 × 81.2 mm81 parts2LApache-2.022.2k
BM28B0.6-24DSBreakout
15.2 × 35.6 mm3 parts2LApache-2.022.2k
View screen
35 × 35 mm12 parts2LApache-2.022.2k
ChainlinkDriverTester
198.1 × 95.3 mm123 parts2LApache-2.04.2k
ChainlinkBase
98.4 × 190.5 mm119 parts2LApache-2.04.2k