Hight Voltage Indicator

RensselaerMotorsport·RM28-Tractive-System·Voltage_Indicator/RM28_Voltage_Indicator_V1.0.kicad_pcb

Hight Voltage Indicator PCB layout, top view — open source board by RensselaerMotorsport

About the Hight Voltage Indicator PCB

Hight Voltage Indicator is an open source PCB design by RensselaerMotorsport, published on GitHub under the BSD-3-Clause license. It is a 2-layer board measuring 44 × 16.5 mm, with 17 components from 11 distinct parts.

Other key parts include the NCP785AH120T1G and 1SMB5927BT3G. By type, the board carries 8 resistors, 3 capacitors, 2 ICs, 2 connectors, 1 transistor and 1 LED.

From the project

Tractive System for 2024-2025 competition car

This respository currently contains several projects for Rensselaer Motorsport's RM28 FSAE competition car, along with some documentation, and spreadsheets for BOMs and calcs * WIP RM28 Project - This project is the most up-to-date version of the 2024-2025 competition car's High Voltage System.

To open and work with these files, use the following software: LTSpice - Circuit simulation software used for preliminary mockups of circuit designs. The .asc files can be opened in other spice programs like ngspice or pspice, but these circuits were originally drafted in LTSpice KiCad - PCB design…

Main components on the Hight Voltage Indicator

NCP785AH120T1G1SMB5927BT3G

Hight Voltage Indicator bill of materials (BOM)

17 components, 11 distinct parts.

QtyPartRefs
1
NCP785AH120T1G
IC1
1
1SMB5927BT3G
U1
1
SBCP56-16T1G
Q1
2
Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal
J1, J2
1
CMD17-21VRD/TR8
LED1
1
KR355WD7LP225MV01L
2.2μf
C1
2
22μf
C2, C3
4
240kΩ
R1, R2, R3, R4
1
20kΩ
R5
2
1kΩ
R6, R8
1
10kΩ
R7

Hight Voltage Indicator design files

The KiCad project lives in the RensselaerMotorsport/RM28-Tractive-System repository on GitHub; these links point at the commit this page was built from.

Hight Voltage Indicator: common questions

How big is the Hight Voltage Indicator PCB?

The Hight Voltage Indicator measures 44 × 16.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hight Voltage Indicator?

17 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Hight Voltage Indicator design files?

From the RensselaerMotorsport/RM28-Tractive-System repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Hight Voltage Indicator design in my own project?

Yes, under the terms of its BSD-3-Clause license, which RensselaerMotorsport chose for the repository.

More boards in RM28-Tractive-System