AutoMate Rebuild
About the AutoMate Rebuild PCB
AutoMate Rebuild is an open source PCB design by reubenvanka, published on GitHub. It is a 2-layer board measuring 101.6 × 53.3 mm, with 7 components from 6 distinct parts.
It belongs with the iot & wireless designs in this gallery.
From the project
AutoMate smart-room controller product repository for firmware, hardware, and release evidence.
Auto Mate is the working product repository for a smart-room controller. The current confirmed intent is coordinated control of lighting and fans, including brightness and color-temperature control, environmental sensing, Home Assistant integration, and a local/custom web interface.
This repository contains the product foundation only. No GPIO assignments, controller model, electrical schematic, PCB, enclosure, or production safety decisions have been approved yet.
AutoMate Rebuild bill of materials (BOM)
7 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Power | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | PWM | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 2 | Analog | PinSocket_1x08_P2.54mm_Vertical | J3, J5 |
| 1 | PWM | PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | Communication | PinSocket_1x08_P2.54mm_Vertical | J6 |
| 1 | Digital | PinSocket_2x18_P2.54mm_Vertical | J7 |
AutoMate Rebuild design files
The KiCad project lives in the reubenvanka/automate repository on GitHub; these links point at the commit this page was built from.
AutoMate Rebuild: common questions
How big is the AutoMate Rebuild PCB?
The AutoMate Rebuild measures 101.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AutoMate Rebuild?
7 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the AutoMate Rebuild design files?
From the reubenvanka/automate repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the AutoMate Rebuild design in my own project?
The repository has no license, so all rights stay with reubenvanka. Use it as a reference, and ask the author before reusing the design.
More boards in automate
Similar boards
RPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0k
L0 IMU MPU9250
Luos-io
20.3 × 15.2 mm7 parts2LMIT547
L0 USBA
20.3 × 15.3 mm19 parts2LMIT547
L0 Controller motor
20.3 × 15.3 mm11 parts2LMIT547
L0 Dynamixel
20.3 × 15.2 mm15 parts2LMIT547
L0 stepper driver
20.3 × 15.2 mm18 parts2LMIT547