PC-Engine IFU-30 Schematics
About the PC-Engine IFU-30 Schematics PCB
PC-Engine IFU-30 Schematics is an open source PCB design by rgalland, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 89 × 51 mm, with 25 components from 8 distinct parts.
Other key parts include the MB81C71 and 74HC245. By type, the board carries 10 ICs, 8 capacitors and 5 connectors.
From the project
PC-Engine IFU reverse engineering
Potential future development: creation of a compatible PCB using SMD component to shrink the board a bit and include RAM on it as well add a header for an easy RGB modification
Main components on the PC-Engine IFU-30 Schematics
PC-Engine IFU-30 Schematics bill of materials (BOM)
25 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | MB81C71 | DIP-22_W7.62mm | IC102, IC103, IC104, IC105, IC106, IC107, IC108, IC109 |
| 2 | 74HC245 | DIP-20_W7.62mm | IC130, IC131 |
| 2 | Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | CN1, CN5 |
| 1 | Conn_02x08_Odd_Even | PinHeader_2x08_P2.54mm_Vertical | CN2 |
| 1 | Conn_02x04_Odd_Even | PinHeader_2x04_P2.54mm_Vertical | CN3 |
| 1 | Conn_02x05_Odd_Even | PinHeader_2x05_P2.54mm_Vertical | CN4 |
| 2 | 47k | R_Array_SIP9 | RA1, RA2 |
| 8 | 100n | C_Disc_D3.0mm_W2.0mm_P2.50mm | C71, C73, C74, C75, C76, C77, C78, C79 |
PC-Engine IFU-30 Schematics design files
The KiCad project lives in the rgalland/PC-Engine_IFU-30_Schematics repository on GitHub; these links point at the commit this page was built from.
PC-Engine IFU-30 Schematics: common questions
How big is the PC-Engine IFU-30 Schematics PCB?
The PC-Engine IFU-30 Schematics measures 89 × 51 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PC-Engine IFU-30 Schematics?
25 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the PC-Engine IFU-30 Schematics design files?
From the rgalland/PC-Engine_IFU-30_Schematics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PC-Engine IFU-30 Schematics design in my own project?
Yes, under the terms of its GPL-3.0 license, which rgalland chose for the repository.