Electronic product workshop
richarthurs·electronic-product-workshop·aero-1/aero-1.kicad_pcb
About the Electronic product workshop PCB
Electronic product workshop is an open source STM32 PCB design by richarthurs, published on GitHub. It is a 4-layer board measuring 98.9 × 100.1 mm, with 24 components from 17 distinct parts.
Its main chip is the STM32F722ZCTx, from the STM32 family. Other key parts include the AZ1117-3.3, AS7262 and M25PX32-VMP. By type, the board carries 6 resistors, 5 connectors, 4 ICs, 3 transistors, 3 diodes and 3 capacitors.
From the project
KiCAD and electronic product development workshop slides and files.
This workshop and video series teaches the basics of KiCAD schematic capture and PCB layout, as well as how to create the required documentation to develop electronic products and projects smoothly.
This series is targeted at skilled hobbyists, engineering students, or those involved in a university-level design team.
Main components on the Electronic product workshop
Electronic product workshop bill of materials (BOM)
24 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F722ZCTx | LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | AZ1117-3.3 | SOT-223 | U2 |
| 1 | AS7262 | AS7262 | U3 |
| 1 | M25PX32-VMP | DFN-S-8-1EP_6x5mm_P1.27mm | U4 |
| 3 | IRF6655 | TSOT-23 | Q1, Q2, Q3 |
| 1 | Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | USB_B_Micro | USB_Micro-B_Molex-105017-0001 | J3 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_02x11_Odd_Even | PinHeader_2x11_P2.54mm_Vertical | J5 |
| 3 | LED | LED_0603_1608Metric | D1, D2, D3 |
| 1 | 1 uF | C_0402_1005Metric | C1 |
| 1 | 1uF | C_0402_1005Metric | C2 |
| 1 | C_Small | C_0402_1005Metric | C3 |
| 2 | 10k | C_01005_0402Metric | R1, R3 |
| 3 | 270 | C_01005_0402Metric | R2, R4, R6 |
| 1 | 1M | C_01005_0402Metric | R5 |
Electronic product workshop design files
The KiCad project lives in the richarthurs/electronic-product-workshop repository on GitHub; these links point at the commit this page was built from.
- Layoutaero-1/aero-1.kicad_pcb
Electronic product workshop: common questions
What microcontroller does the Electronic product workshop use?
The Electronic product workshop is built around the STM32F722ZCTx, from the STM32 family.
How big is the Electronic product workshop PCB?
The Electronic product workshop measures 98.9 × 100.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Electronic product workshop?
24 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Electronic product workshop design files?
From the richarthurs/electronic-product-workshop repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Electronic product workshop design in my own project?
The repository has no license, so all rights stay with richarthurs. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Electronic product workshop without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k