Tab charger
rkrafted·silent-speech·hw/revisions/2026-10-16-676691bc/tab_charger/tab_charger.kicad_pcb
About the Tab charger PCB
Tab charger is an open source PCB design by rkrafted, published on GitHub under the MIT license. It is a 2-layer board measuring 22.4 × 30 mm, with 3 components from 2 distinct parts.
By type, the board carries 2 resistors and 1 connector.
It belongs with the wearables and power & battery designs in this gallery.
From the project
Untested silent-speech wearable: KiCad hardware revisions + research notes
Research notes and a first-pass hardware design for a personal silent-speech wearable: a device that recognises words articulated without sound from face/jaw/neck biosignals (sEMG), in the spirit of AlterEgo and Gaddy's silent-speech work.
Revision snapshots: - hw/revisions/2026-10-07-0d3cfc9e/ - hw/revisions/2026-10-07-16618296/ - hw/revisions/2026-10-07-392cefe4/ - hw/revisions/2026-10-07-7efeed88/ - hw/revisions/2026-10-16-01f62380/ - hw/revisions/2026-10-16-676691bc/ - hw/revisions/2026-10-19-591862ab/
Tab charger bill of materials (BOM)
3 components, 2 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 2 | 0402WGF2201TCE 5.1k | R_0402_1005Metric | R1, R2 |
Tab charger design files
The KiCad project lives in the rkrafted/silent-speech repository on GitHub; these links point at the commit this page was built from.
Tab charger: common questions
How big is the Tab charger PCB?
The Tab charger measures 22.4 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tab charger?
3 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tab charger design files?
From the rkrafted/silent-speech repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Tab charger design in my own project?
Yes, under the terms of its MIT license, which rkrafted chose for the repository.
More boards in silent-speech
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkDriver
scottbez1
198.1 × 30.5 mm58 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k