RBPS

RohanRathod2605·RBPS

RBPS PCB layout, top view — open source STM32 board by RohanRathod2605

About the RBPS PCB

RBPS is an open source STM32 PCB design by RohanRathod2605, published on GitHub. It is a 4-layer board measuring 100 × 80 mm, with 94 components from 27 distinct parts.

Its main chip is the STM32C011D6Yx, from the STM32 family. Other key parts include the BQ76940DBT. By type, the board carries 48 resistors, 27 capacitors, 7 diodes, 4 transistors, 3 connectors and 2 ICs.

It belongs with the power & battery designs in this gallery.

From the project

KiCad hardware design for an electric-vehicle battery management system (BMS) module. The design is built around the TI BQ76940DBT battery monitor and includes cell monitoring, passive balancing, temperature sensing, pack switching, and an external pack connection.

KiCad hardware design for an electric-vehicle battery management system (BMS) module. The design is built around the TI BQ76940DBT battery monitor and includes cell monitoring, passive balancing, temperature sensing, pack switching, and an external pack connection.

The schematic uses the BQ76940DBT, which supports lithium battery monitoring for 9 to 15 series cells, provides integrated balancing control, and communicates through I2C. The surrounding circuitry includes:

RBPS, from the project README
From the project README

Main components on the RBPS

RBPS bill of materials (BOM)

94 components, 27 distinct parts.

QtyPartRefs
1
BQ76940DBT
U1
1
STM32C011D6Yx
U2
4
BSC010N04LS
Q1, Q2, Q4, Q5
1
Conn_01x14_Socket
J1
1
XT90PW-F
J2
1
Conn_01x04_Pin
J3
1
Fuse
F2
2
NCP18XH103F03RB
RT1, RT2
1
PWR LED
D1
1
FAULT LED
D2
4
D_Zener
D3, D4, D5, D6
1
D_TVS
D7
14
0.1u
C1, C2, C3, C4, C5, C6, C7, C8 +6
3
0.22u
C15, C16, C17
1
1u
C18
5
0.1u
C19, C20, C21, C23, C26
1
1u
C22
1
100nF
C24
1
1u
C25
1
100pF
C27
Show 7 more
QtyPartRefs
25
100
R1, R2, R3, R4, R5, R6, R7, R8 +17
5
1k
R15, R17, R23, R24, R33
1
1m
R16
2
4.7k
R20, R21
1
10k
R22
13
100
R34, R35, R36, R37, R38, R39, R40, R41 +5
1
100
R47

RBPS design files

The KiCad project lives in the RohanRathod2605/RBPS repository on GitHub; these links point at the commit this page was built from.

RBPS: common questions

What microcontroller does the RBPS use?

The RBPS is built around the STM32C011D6Yx, from the STM32 family.

How big is the RBPS PCB?

The RBPS measures 100 × 80 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the RBPS?

94 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the RBPS design files?

From the RohanRathod2605/RBPS repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RBPS design in my own project?

The repository has no license, so all rights stay with RohanRathod2605. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RBPS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards