Tic-Tac-Toe using-Logic-Gates
About the Tic-Tac-Toe using-Logic-Gates PCB
Tic-Tac-Toe using-Logic-Gates is an open source PCB design by rohitjethani, published on GitHub. It is a 2-layer board measuring 50.8 × 17.8 mm, with 5 components from 4 distinct parts.
Other key parts include the L7805. By type, the board carries 2 connectors, 2 capacitors and 1 IC.
From the project
There have been many software implementations of Tic-Tac-Toe. There have been a few hardware implementations on breadboard but none of them is where it was converted to PCB (Printed Circuit Board). For this project, I am using KiCAD software. It is a open source software. I did a
There have been many software implementations of Tic-Tac-Toe. There have been a few hardware implementations on breadboard but none of them is where it was converted to PCB (Printed Circuit Board). For this project, I am using KiCAD software. It is a open source software. I did an online course on Udemy 'Introduction to KiCAD' by Javier Martinez.
Main components on the Tic-Tac-Toe using-Logic-Gates
Tic-Tac-Toe using-Logic-Gates bill of materials (BOM)
5 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | L7805 | TO-220-3_Vertical | U1 |
| 1 | Jack-DC | BarrelJack_Horizontal | J1 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 2 | 100nF | C_Disc_D6.0mm_W4.4mm_P5.00mm | C1, C2 |
Tic-Tac-Toe using-Logic-Gates design files
The KiCad project lives in the rohitjethani/Tic-Tac-Toe-using-Logic-Gates repository on GitHub; these links point at the commit this page was built from.
- Layout1_7805.kicad_pcb
Tic-Tac-Toe using-Logic-Gates: common questions
How big is the Tic-Tac-Toe using-Logic-Gates PCB?
The Tic-Tac-Toe using-Logic-Gates measures 50.8 × 17.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Tic-Tac-Toe using-Logic-Gates?
5 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tic-Tac-Toe using-Logic-Gates design files?
From the rohitjethani/Tic-Tac-Toe-using-Logic-Gates repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Tic-Tac-Toe using-Logic-Gates design in my own project?
The repository has no license, so all rights stay with rohitjethani. Use it as a reference, and ask the author before reusing the design.