481 open source boards using the L7805

Real designs built with the L7805, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

481 boardsClear filters|Most starred

How designs wire the L7805

Read from the KiCad layouts of 349 open source designs, one per repository: what each pin of the L7805 connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin is tied to 5V on 268 of 347 designs (GND on 2, a signal on 77).
GNDpin 2Connected to: GND 95%
OUTpin 3Connected to: 5V 77% · a signal 22%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Super Sixteen v1 by matthewcieplak, Pico dco by polykit, Harness tester challenge by commaai and All in One Railroad Interface by GBert.

The L7805 in open source designs

The gallery holds 481 open source boards using the L7805 from 366 GitHub repositories; a typical one measures about 99 × 82.1 mm and carries around 45 components.

91% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Super Sixteen v1 by matthewcieplak.

Microcontrollers on boards using the L7805

L7805: common questions

Where can I find a L7805 reference design?

Each of the 481 boards on this page is a real design using the L7805. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the L7805 OUT pin connected?

The OUT pin is tied to 5V on 268 of 347 designs (GND on 2, a signal on 77). Counted from the KiCad layouts of 349 open source designs using the L7805.

What parts are used alongside the L7805?

The AMS1117-3.3, L7812, LM358, Arduino_Nano_v3.x and TL074 appear in the most repositories here.

Which microcontrollers do boards using the L7805 use?

Most are built on AVR/Arduino (103), ESP32 (55), STM32 (33) and RP2040/RP2350 (17).

How big is a typical board using the L7805?

The median is 99 × 82.1 mm, and 91% are two-layer designs.

What is the most popular open source board using the L7805?

By GitHub stars, Super Sixteen v1 by matthewcieplak, with 171 stars.

Can I simulate one of these boards using the L7805 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part