Mints
About the Mints PCB
Mints is an open source PCB design by rsk9inner-beep, published on GitHub. It is a 2-layer board measuring 75 × 75.1 mm, with 31 components from 21 distinct parts.
Other key parts include the TGS2611-C00, AP2112K-3.3 and BME280. By type, the board carries 9 connectors, 7 capacitors, 7 resistors, 3 ICs, 2 jumpers and 1 transistor.
Main components on the Mints
Mints bill of materials (BOM)
31 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TGS2611-C00 | TGS2611C00 | IC1 |
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | BME280 | Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | BSS138 | SOT-363 | Q1 |
| 1 | GPIO | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 4 | Qwiic_Vertical | JST_1x04_P1.0mm_Vertical_SMD | J2, J4, J6, j9 |
| 1 | 679305124022 | 679305124022 | J3 |
| 1 | M20-7830542 | HARWIN_M20-7830542 | J5 |
| 1 | 5013310607 | MOLEX_5013310607 | J7 |
| 1 | 10132328-10011LF | AMPHENOL_10132328-10011LF | J11 |
| 2 | ~ | Jumper_2_NO | JP2, JP3 |
| 1 | AB11AH-FC NK236 | SWITCH_NK236_APM | S1 |
| 1 | WS2812B_5050 | WS2812_5050-4Pin | D1 |
| 3 | 0.1uF | C_0603_1608Metric | C1, C5, C6 |
| 3 | 10uF | C_0805_2012Metric | C2, C3, C4 |
| 1 | EEV107M010S9GAA | CP_Radial_D6.3mm_P2.50mm | C7 |
| 3 | 10k | R_Array_Convex_4x0603 | R1, R2, R5 |
| 1 | 10k | R_0603_1608Metric | R3 |
| 1 | RC0603FR-075K1L | RESC1607X60N | R6 |
| 1 | 5.1k | R_0603_1608Metric | R7 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RC0603FR-07330RL | RESC1607X60N | R8 |
Mints design files
The KiCad project lives in the rsk9inner-beep/mints-pcb repository on GitHub; these links point at the commit this page was built from.
Mints: common questions
How big is the Mints PCB?
The Mints measures 75 × 75.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mints?
31 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mints design files?
From the rsk9inner-beep/mints-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mints design in my own project?
The repository has no license, so all rights stay with rsk9inner-beep. Use it as a reference, and ask the author before reusing the design.