252 open source boards using the BME280
Real designs built with the BME280, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398STM32
Multistepper
eddyem
113.5 × 105.5 mm234 parts4LNo license208ESP32
Pcb designer ai agent
assalas
40 × 30 mm17 parts2LMIT127Microchip SAM
Tiny4FSK
New-England-Weather-Balloon-Society
35.1 × 76.3 mm80 parts4LCERN-OHL-W-2.096STM32
Pecanpico9
DL7AD
29.8 × 33.7 mm112 parts2LGPL-3.068ESP32
ClimateSprinklerController
kbx81
217 × 108 mm189 parts2LNo license55Microchip SAM
StratoSoar-MK3.0
crnicholson
36.6 × 60.3 mm76 parts4LNo license42STM32
Pecanpico10
DL7AD
23 × 50 mm119 parts2LCustom license41ESP8266
ESPlant
CCHS-Melbourne
97 × 77.5 mm75 parts2LTAPR-OHL-1.037ESP32
ESPHome-DeskPI-Fan-Controller
mikaelholber
39 × 39 mm39 parts4LNo license37ESP32
Elixir hw
golioth
71.5 × 71.5 mm218 parts4LCERN-OHL-P-2.036ESP32
Iotuz esp32-hardware
CCHS-Melbourne
150 × 95 mm97 parts2LTAPR-OHL-1.035Nordic nRF
M2-smart iot module
antmicro
80.2 × 22.2 mm210 parts4LApache-2.030- schematic only · 69 parts
Cohdl
conol-ai
69 partsMIT19 ESP32
Colors of italy
valerionew
94 parts2LNo license16ESP32
Nomad
0Zane
65 × 120 mm69 parts2LMIT15ESP32
MoleNet V7.1
ComNets-Bremen
106 × 66.8 mm70 parts4LGPL-3.013ESP32
PCB-Mini-Environmental-Sensor
MbFredys
25.1 × 25.2 mm32 parts2LCERN-OHL-W-2.013ESP32
Esp32-ethernet
russss
54 × 40 mm36 parts2LNo license10AVR/Arduino
Project-Okapi
NorthernWidget
64.8 × 135 mm251 parts2LCC-BY-SA-4.08ESP32
Meteo station
alicjamusial
110 × 90 mm23 parts2LCC-BY-SA-4.08ESP32
Esp
0Zane
100 × 80 mm82 parts2LMIT6ESP32
ESP32 BASED PCB
BitwiseAjeet
98 × 55.5 mm81 parts4LMIT6- schematic only · 170 parts
Yatagarasu red
DCoJA
170 partsCC-BY-SA-4.05 ESP32
WifiWallSwitch
Uspizig
65.4 × 68 mm141 parts2LGPL-3.04ESP32
WeatherV3-kernelcon2026
ZonkSec
66 × 143.3 mm82 parts2LNo license4- schematic only · 41 partsAVR/Arduino
FumeBot
ajithcodesit
41 partsMIT4 ESP32
Sigfox chicken coop
Jeija
50 × 53 mm99 parts4LNo license3AVR/Arduino
PtFlex
custom-ds
50.1 × 88.2 mm76 parts2LGPL-3.03ESP8266
Weather station
mec-kon
24 × 57.8 mm73 parts2LGPL-3.03Environment sensor myra baseboard
antmicro
50 × 26.5 mm53 parts4LApache-2.03ESP32
Esp32s3-plant monitor
MuffinByteLabs
62.5 × 44.5 mm51 parts4LCERN-OHL-P-2.03ESP8266
NixieClock
gztproject
146.7 × 95.3 mm46 parts2LMIT3ESP32
Esp32 sensornode
rmd6502
70 × 33 mm35 parts2LApache-2.03Rosario-ROV
dakriy
65 × 56 mm18 parts2LMIT3BME280-Breakout
Destination-SPACE
12.7 × 12.7 mm10 parts2LCERN-OHL-P-2.03
How designs wire the BME280
Read from the KiCad layouts of 206 open source designs, one per repository: what each pin of the BME280 connects to, and the resistors, capacitors and other passives placed on it.
- The VDDIO pin has a decoupling capacitor on 147 of 198 designs, most often 100 nF (then 1 µF).
- The VDD pin has a decoupling capacitor on 147 of 189 designs, most often 100 nF (then 1 µF).
- The SCK pin has a pull-up to 3.3V on 140 of 205 designs, most often 4.7 kΩ (then 10 kΩ).
- The SDI pin has a pull-up to 3.3V on 136 of 205 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 7 | Connected to: GND 91% | — |
| CSBpin 2 | Connected to: 3.3V 66% · a signal 26% | — |
| SDIpin 3 | Connected to: The microcontroller 61%, a connector 38% |
|
| SCKpin 4 | Connected to: The microcontroller 62%, a connector 39% |
|
| VDDIOpin 6 | Connected to: 3.3V 82% · a signal 16% |
|
| VDDpin 8 | Connected to: 3.3V 86% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Iaq board by nkitanov, Chiller control by eddyem, Pcb designer ai agent by assalas and Tiny4FSK by New-England-Weather-Balloon-Society.
The BME280 in open source designs
The gallery holds 252 open source boards using the BME280 from 219 GitHub repositories; a typical one measures about 70 × 56 mm and carries around 69 components.
54% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is Iaq board by nkitanov.
Parts used alongside the BME280
Microcontrollers on boards using the BME280
What boards using the BME280 are built for
BME280: common questions
Where can I find a BME280 reference design?
Each of the 252 boards on this page is a real design using the BME280. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the BME280 VDDIO pin?
The VDDIO pin has a decoupling capacitor on 147 of 198 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 206 open source designs using the BME280.
What decoupling capacitors do designs use on the BME280 VDD pin?
The VDD pin has a decoupling capacitor on 147 of 189 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 206 open source designs using the BME280.
What pull-up resistor is used on the BME280 SCK pin?
The SCK pin has a pull-up to 3.3V on 140 of 205 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 206 open source designs using the BME280.
What parts are used alongside the BME280?
The USBLC6-2SC6, ESP32-C3-WROOM-02-H4, W25Q32JVSSIQ, MAX4466EXK and CP2102N-Axx-xQFN20 appear in the most repositories here.
Which microcontrollers do boards using the BME280 use?
Most are built on ESP32 (118), STM32 (38), Nordic nRF (11) and AVR/Arduino (11).
How big is a typical board using the BME280?
The median is 70 × 56 mm, and 54% are two-layer designs.
What is the most popular open source board using the BME280?
By GitHub stars, Iaq board by nkitanov, with 398 stars.
Can I simulate one of these boards using the BME280 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.