Autonomous-Unmanned-System

Ryannscotty·Autonomous-Unmanned-System·Flight Controller Hardware/FlightController.kicad_sch

Autonomous-Unmanned-System

About the Autonomous-Unmanned-System PCB

Autonomous-Unmanned-System is an open source STM32 PCB design by Ryannscotty, published on GitHub. It is a board, with 38 components from 22 distinct parts.

Its main chip is the STM32H723ZGIx, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 23 capacitors, 4 resistors, 3 diodes, 2 ICs, 2 connectors and 2 switches.

It belongs with the robotics & motion, rf & radio and sensors designs in this gallery.

From the project

An open-source Unmanned Aircraft System (UAS) built around a custom FPV drone, ground control station (GCS), and RC controller — designed as an end-to-end embedded systems and RF project

The companion ground station (HTML/JS GCS with a live mission planning) and the FPGA/SDR telemetry link this firmware is designed to pair with live in separate repos — see Related work.

- Ground control station — HTML/JS GCS with live MAVLink telemetry, mission planning with real tile-map waypoints response panel. (link to repo) 🚧 Not yet written - SDR telemetry link — GNU Radio flowgraph for the ADALM-PLUTO ground station: bridging to MAVLink over a local TCP socket. (link to repo) 🚧 Not yet written - FPGA Video Feed link - Custom Lattice MACHXO3LF FPGA board integrated with Sony IMX219…

Main components on the Autonomous-Unmanned-System

STM32H723ZGIxAMS1117-3.3

Autonomous-Unmanned-System bill of materials (BOM)

38 components, 22 distinct parts.

QtyPartRefs
1
STM32H723ZGIx
U1
1
AMS1117-3.3
U2
1
Crystal_GND24
Y1
1
Conn_01x08_Pin
J1
1
USB_C_Plug_USB2.0
P1
1
SW_Push
SW1
1
SW_Nidec_CAS-120A1
SW2
1
green
D1
1
red
D2
1
BAT54C
D5
1
120R
FB1
1
0.1 uF
C1
12
100n
C2, C8, C15, C16, C17, C18, C19, C20 +4
2
20pF
C3, C4
2
22u
C5, C6
1
2,2uF
C11
1
4.7uF
C13
1
100nF
C25
2
1uF
C26, C27
1
2.2uF
C31
Show 2 more
QtyPartRefs
1
10k
R1
3
1k5
R2, R3, R4

Autonomous-Unmanned-System design files

The KiCad project lives in the Ryannscotty/Autonomous-Unmanned-System repository on GitHub; these links point at the commit this page was built from.

Autonomous-Unmanned-System: common questions

What microcontroller does the Autonomous-Unmanned-System use?

The Autonomous-Unmanned-System is built around the STM32H723ZGIx, from the STM32 family.

How many components are on the Autonomous-Unmanned-System?

38 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Autonomous-Unmanned-System design files?

From the Ryannscotty/Autonomous-Unmanned-System repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Autonomous-Unmanned-System design in my own project?

The repository has no license, so all rights stay with Ryannscotty. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Autonomous-Unmanned-System without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards