MCU Distibution Board V1
About the MCU Distibution Board V1
MCU Distibution Board V1 is an open source PCB design by saadmaziz, published on GitHub under the MIT license. It is a 2-layer board measuring 117 × 92 mm, with 8 components from 7 distinct parts.
By type, the board carries 6 connectors, 1 switch and 1 resistor.
From the project
Design Files for the 3rd year EEE design project at the University of Glasgow. Line following rover, with obstacle avoidance, traffic lights detection,
1 - Team Organisation and 6 - General Documents are not uploaded as they may contain non-relavant information that should not be made public
My personal contributions spanned all of the software, all of the mechanical design, a substantial part of the electronic hardware design, and most of the integration.
MCU Distibution Board V1 bill of materials (BOM)
8 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_02x08_Odd_Even | PinSocket_2x08_P2.54mm_Vertical | J1, J9 |
| 1 | Conn_02x10_Odd_Even | PinSocket_2x10_P2.54mm_Vertical | J2 |
| 1 | PWR | Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_02x06_Odd_Even | PinSocket_2x06_P2.54mm_Vertical | J10 |
| 1 | FRDM-KL25Z | FRDM-KL25Z | J100 |
| 1 | SW_DPST | SW_Push_2P1T_Toggle_CK_PVA1xxH1xxxxxxV2 | SW1 |
| 1 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
MCU Distibution Board V1 design files
The KiCad project lives in the saadmaziz/UoG_TDP_EE3_Team-7_2025-26 repository on GitHub; these links point at the commit this page was built from.
MCU Distibution Board V1: common questions
How big is the MCU Distibution Board V1?
The MCU Distibution Board V1 measures 117 × 92 mm, has 2 copper layers and is 1.58 mm thick.
How many components are on the MCU Distibution Board V1?
8 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the MCU Distibution Board V1 design files?
From the saadmaziz/UoG_TDP_EE3_Team-7_2025-26 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MCU Distibution Board V1 design in my own project?
Yes, under the terms of its MIT license, which saadmaziz chose for the repository.
More boards in UoG_TDP_EE3_Team-7_2025-26
Switch Encoder Controller
97 × 62.6 mm83 parts2LMIT0
ESP32Distribution Board V2
206 × 202 mm48 parts2LMIT0
TDP3 VOLTAGE REG w BUCK
85.5 × 65 mm43 parts2LMIT0
TDP3 T7 H-Bridge V-1
83.5 × 85 mm39 parts2LMIT0
TDP3 VOLTAGE REG
85 × 45.5 mm24 parts2LMIT0
ESP32ESP32 Breakout V1
42 × 53 mm18 parts2LMIT0
AVR/ArduinoESP32 Programming Board V2
70.3 × 58.8 mm11 parts2LMIT0
LiDar Baseboard (Angle Measurement) V1
50 × 38.5 mm10 parts2LMIT0
LiDAR Distance Measurement V1
29.5 × 25.8 mm8 parts2LMIT0
Breakout OSRAM TMF8806-1AM V1
19 × 21.6 mm7 parts2LMIT0
Line following V3
26.8 × 36.8 mm7 parts2LMIT0