Register
About the Register PCB
Register is an open source PCB design by SABRINIAC, published on GitHub. It is a 2-layer board measuring 62.5 × 51.6 mm, with 143 components from 3 distinct parts.
By type, the board carries 100 resistors, 42 transistors and 1 connector.
From the project
It is for my '60s inspired computer im making base don the Intel 8080. At the time of writing this I have RAM + it's clock done and the ALU Modules done. After I get the registers + buffers I'll only have to make a motherboard and an opcode decoder/microcode.
It is for my '60s inspired computer im making base don the Intel 8080. At the time of writing this I have RAM + it's clock done and the ALU Modules done. After I get the registers + buffers I'll only have to make a motherboard and an opcode decoder/microcode.
The SABRINIAC is my '60s inspired, transistor based,, Intel 8008 Architecture computer. Every part of it from the instruction decoder to the alu will be built using purely transistors.
Register bill of materials (BOM)
143 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 42 | NPN | TO-92 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +34 |
| 1 | CONN_01X20_PIN Conn_01x20_Pin | PinHeader_1x20_P2.54mm_Horizontal | J1 |
| 100 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +92 |
Register design files
The KiCad project lives in the SABRINIAC/8BitRegister repository on GitHub; these links point at the commit this page was built from.
Register: common questions
How big is the Register PCB?
The Register measures 62.5 × 51.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Register?
143 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Register design files?
From the SABRINIAC/8BitRegister repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Register design in my own project?
The repository has no license, so all rights stay with SABRINIAC. Use it as a reference, and ask the author before reusing the design.
