Dso475

sambazley·dso475·pcb/rs423.kicad_pcb

Dso475 PCB layout, top view — open source STM32 board by sambazley

About the Dso475 PCB

Dso475 is an open source STM32 PCB design by sambazley, published on GitHub under the Zlib license. It is a 2-layer board measuring 31.8 × 61.6 mm, with 24 components from 16 distinct parts.

Its main chip is the STM32F042F4Px, from the STM32 family. Other key parts include the 140817143300 and AP7335. By type, the board carries 9 resistors, 6 capacitors, 3 ICs, 3 connectors, 2 diodes and 1 transistor.

It belongs with the test & measurement designs in this gallery.

From the project

USB interface for Gould DSO 475 oscilloscope

PCB and software to interface a Gould 475 oscilloscope with a PC over USB.

The STM32 software interprets the HPGL that is output from the oscilloscope and converts it to SVG format. The SVG data is transmitted to dsoctl over USB.

Dso475, from the project README
From the project README

Main components on the Dso475

Dso475 bill of materials (BOM)

24 components, 16 distinct parts.

QtyPartRefs
1
140817143300
U1
1
AP7335
U2
1
STM32F042F4Px
U3
1
MMBTA06
Q1
1
DB9_Male
J1
1
USB_B
J2
1
Conn_01x04
J3
2
LED
D1, D2
3
1u
C1, C2, C3
1
4u7
C4
1
100n
C5
1
10n
C6
6
1k
R1, R2, R5, R6, R7, R8
1
15k
R3
1
4k7
R4
1
10k
R9

Dso475 design files

The KiCad project lives in the sambazley/dso475 repository on GitHub; these links point at the commit this page was built from.

Dso475: common questions

What microcontroller does the Dso475 use?

The Dso475 is built around the STM32F042F4Px, from the STM32 family.

How big is the Dso475 PCB?

The Dso475 measures 31.8 × 61.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dso475?

24 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Dso475 design files?

From the sambazley/dso475 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Dso475 design in my own project?

Yes, under the terms of its Zlib license, which sambazley chose for the repository.

Can I test firmware for the Dso475 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards