Cc1200

seanstone·cc1200

Cc1200 PCB layout, top view — open source STM32 board by seanstone

About the Cc1200 PCB

Cc1200 is an open source STM32 PCB design by seanstone, published on GitHub. It is a 4-layer board measuring 45.7 × 23.8 mm, with 45 components from 31 distinct parts.

Its main chip is the STM32L475RC, from the STM32 family. Other key parts include the TPS79333, CC1200 and BALF-112X-02D3. By type, the board carries 24 capacitors, 5 connectors, 5 resistors, 4 ICs, 2 crystals and 2 switches.

Main components on the Cc1200

TPS79333CC1200BALF-112X-02D3STM32L475RC

Cc1200 bill of materials (BOM)

45 components, 31 distinct parts.

QtyPartRefs
1
TPS79333
U1
1
CC1200
U2
1
BALF-112X-02D3
U3
1
STM32L475RC
U4
1
40MHz
Y1
1
8MHz(16pF)
Y2
1
USB_OTG
J1
1
CONN_PWR
J2
1
CONN_DEBUG
J3
1
CONN_USART
J4
1
SMA
P1
2
SW_Push
SW1, SW2
1
LED_PWR
D1
1
LED_TEST
D2
1
56nH
L171
1
0.1uF
C1
1
0.01uF
C2
1
2.2uF
C3
1
0.1uF/25V
C4
2
20pF
C5, C6
Show 11 more
QtyPartRefs
11
47nF
C11, C51, C121, C131, C151, C221, C251, C261 +3
1
100pF
C17A1
1
220nF
C61
1
56pF
C173
1
10nF
C211
1
1.5nF
C231
2
15pF
C301, C311
2
200
R1, R2
1
10k
R3
1
56k
R141
1
18
R171

Cc1200 design files

The KiCad project lives in the seanstone/cc1200 repository on GitHub; these links point at the commit this page was built from.

Cc1200: common questions

What microcontroller does the Cc1200 use?

The Cc1200 is built around the STM32L475RC, from the STM32 family.

How big is the Cc1200 PCB?

The Cc1200 measures 45.7 × 23.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Cc1200?

45 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the Cc1200 design files?

From the seanstone/cc1200 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Cc1200 design in my own project?

The repository has no license, so all rights stay with seanstone. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Cc1200 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards