Diseño de PCB : LDO Grupo 7
Seba-SL·TP-TA138-G7·Hardware/Diseño PCB/LDO/Prueba.kicad_pcb
About the Diseño de PCB : LDO Grupo 7
Diseño de PCB : LDO Grupo 7 is an open source PCB design by Seba-SL, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 63 components from 30 distinct parts.
By type, the board carries 25 resistors and 19 transistors.
From the project
Diseño eficiente de una fuente de tensión conmutada de 5V a partir de la tensión de una batería. Alimentación estable a cargas como microprocesadores, sensores y transceptores de comunicación, tanto para aplicaciones automotrices como industriales.
Integrantes: - Mántaras, Ramiro, , - Flores, Ahmed Ali, 106238, aaflores@fi.uba.ar - Lazo, Sebastian Nahuel, 106213, slazo@fi.uba.ar
Paso 2: Cada vez que alguien modifique el proyecto, actualizar:
Paso 3: Cada vez que uno trabaje en el proyecto, subir los cambios (importante actualizar antes):
Diseño de PCB : LDO Grupo 7 bill of materials (BOM)
63 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | BC557 | TO-92_HandSolder | Q2, Q3, Q4, Q5, Q6, Q10, Q12 |
| 1 | IRF4905 | TO-220-3_Vertical | Q8 |
| 11 | BC547 | TO-92_HandSolder | Q9, Q11, Q20, Q21, Q22, Q23, Q24, Q25 +3 |
| 1 | 220 nF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C_comp_c1 |
| 1 | 2,2nF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C_comp_c3 |
| 1 | 100 pF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C_comp_t1 |
| 1 | Pin_GND | PinHeader_1x01_P2.00mm_Vertical | GND1 |
| 1 | JC | PinHeader_1x03_P2.00mm_Vertical | Jc1 |
| 1 | JV | PinHeader_1x03_P2.00mm_Vertical | Jv2 |
| 1 | LM324 | DIP-14_W10.16mm_LongPads | LM324 |
| 2 | Preset | Potentiometer_Bourns_3339P_Vertical_HandSoldering | RV1, RV2 |
| 1 | 0.2 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | Rs1 |
| 1 | TL431LP | TO-92_HandSolder | TL431 |
| 1 | V_Rs_test | PinHeader_1x02_P2.00mm_Vertical | V_Rs_test1 |
| 1 | V_Ctrl | PinHeader_1x01_P2.00mm_Vertical | V_ctrl1 |
| 1 | V_current_ref_test | PinHeader_1x01_P2.00mm_Vertical | V_current_ref_test1 |
| 1 | Vin | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | V_in1 |
| 1 | V_ref_c_test1 | PinHeader_1x01_P2.00mm_Vertical | V_ref_c_test1 |
| 1 | V_ref_t_test | PinHeader_1x01_P2.00mm_Vertical | V_ref_t_test1 |
| 1 | V_voltage_test | PinHeader_1x01_P2.00mm_Vertical | V_voltage_test1 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Vo | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | Vo1 |
| 3 | 2.2k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R3, R13 |
| 6 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R9, R10, R25, R26, R28 |
| 9 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R5, R7, R8, R17, R18, R19, R20 +1 |
| 1 | 3k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6 |
| 2 | 4.7k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R11, R12 |
| 1 | 1.4k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R21 |
| 1 | 1.1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R22 |
| 1 | 800 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R23 |
| 1 | 1.7k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R24 |
Diseño de PCB : LDO Grupo 7 design files
The KiCad project lives in the Seba-SL/TP-TA138-G7 repository on GitHub; these links point at the commit this page was built from.
Diseño de PCB : LDO Grupo 7: common questions
How big is the Diseño de PCB : LDO Grupo 7?
The Diseño de PCB : LDO Grupo 7 measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Diseño de PCB : LDO Grupo 7?
63 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Diseño de PCB : LDO Grupo 7 design files?
From the Seba-SL/TP-TA138-G7 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Diseño de PCB : LDO Grupo 7 design in my own project?
The repository has no license, so all rights stay with Seba-SL. Use it as a reference, and ask the author before reusing the design.