Ipod serial adapter
About the Ipod serial adapter PCB
Ipod serial adapter is an open source PCB design by sektioneins, published on GitHub. It is a 2-layer board measuring 21.6 × 49.5 mm, with 35 components from 24 distinct parts.
Other key parts include the GL850G-LQFP48, LM3526M-L and FT232RL-BASICSSOP. By type, the board carries 14 capacitors, 9 resistors, 4 diodes, 3 ICs, 2 connectors and 2 inductors.
From the project
circuit board (PCB) schematics for 30-pin iPod serial debugging
Main components on the Ipod serial adapter
Ipod serial adapter bill of materials (BOM)
35 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | GL850G-LQFP48 | LQFP48 | IC1 |
| 1 | LM3526M-L | SO08 | U1 |
| 1 | FT232RL-BASICSSOP | SSOP-28 | U2 |
| 1 | 12 Mhz | Crystal_Round_Vertical_3mm | X1 |
| 1 | USB-MINIB-5PIN | USB-MINIB | J1 |
| 1 | IPOD_CONNECTOR_MALE | IPOD_MALE_CONNECTOR | P1 |
| 1 | Suspend | LED-0603 | D1 |
| 1 | Green | LED-0603 | D2 |
| 1 | RX | LED-0603 | D3 |
| 1 | TX | LED-0603 | D4 |
| 2 | FILTER | SM0603 | FB1, FB2 |
| 1 | 10uF/10V | SM0603 | C1 |
| 9 | 100nF | SM0603 | C2, C5, C6, C8, C9, C10, C12, C13 +1 |
| 1 | 100uF | SM1206 | C4 |
| 1 | 1uF | SM0603 | C15 |
| 2 | 20pF | SM0603 | C16, C17 |
| 1 | 470R | SM0603 | R1 |
| 1 | 270R | SM0603 | R2 |
| 1 | 470K | SM0603 | R5 |
| 1 | 100K | SM0603 | R6 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0R | SM0603 | R7, R8 |
| 1 | 10K | SM0603 | R10 |
| 1 | 680R | SM0603 | R11 |
| 1 | 47K | SM0603 | R12 |
Ipod serial adapter design files
The KiCad project lives in the sektioneins/ipod-serial-adapter repository on GitHub; these links point at the commit this page was built from.
- Layouts1_ipod_serial.kicad_pcb
Ipod serial adapter: common questions
How big is the Ipod serial adapter PCB?
The Ipod serial adapter measures 21.6 × 49.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ipod serial adapter?
35 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Ipod serial adapter design files?
From the sektioneins/ipod-serial-adapter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Ipod serial adapter design in my own project?
The repository has no license, so all rights stay with sektioneins. Use it as a reference, and ask the author before reusing the design.