Hubsy PSU
About the Hubsy PSU PCB
Hubsy PSU is an open source PCB design by sensorable, published on GitHub. It is a 6-layer board measuring 16.9 × 95.7 mm, with 4 components from 3 distinct parts.
By type, the board carries 2 connectors and 2 capacitors.
From the project
Electronics for Sensorable Open Source Camera
Sensorable camera is a low power edge computer for smart applications with limited power and bandwidth. It is based on Samsung G935F smartphone board with auxiliary chassis and electronics.
Applications: outdoor security remote site monitoring beach / nature cams traffic monitoring vehicle counting ALPR / ANPR * speed control and monitoring
The camera can be assembled, programmed, tested and deployed by a sufficiently skilled technician.
Hubsy PSU bill of materials (BOM)
4 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_BASIC_10_PIN NANO_SIM_BOARD | G935SDSIM_CONN | P1 |
| 1 | NANO_SIM_SF72S006VBAR2500 | JAE-SF72S006VBAR2500 | P2 |
| 2 | 10UF Cap_UnPol | 0603_Medium_Pads | C1, C2 |
Hubsy PSU design files
The KiCad project lives in the sensorable/g935-electronics repository on GitHub; these links point at the commit this page was built from.
Hubsy PSU: common questions
How big is the Hubsy PSU PCB?
The Hubsy PSU measures 16.9 × 95.7 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Hubsy PSU?
4 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hubsy PSU design files?
From the sensorable/g935-electronics repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Hubsy PSU design in my own project?
The repository has no license, so all rights stay with sensorable. Use it as a reference, and ask the author before reusing the design.
