HardLabs

Blackmagic bmp2-clone

sergiomd4·blackmagic-bmp2-clone·Hardware/bmp2.kicad_pcb

Blackmagic bmp2-clone PCB layout, top view — open source STM32 board by sergiomd4

About the Blackmagic bmp2-clone PCB

Blackmagic bmp2-clone is an open source STM32 PCB design by sergiomd4, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 58.9 × 28.1 mm, with 32 components from 18 distinct parts.

Its main chip is the STM32F102CB, from the STM32 family. Other key parts include the MCP1802. By type, the board carries 12 resistors, 9 capacitors, 4 diodes, 2 ICs, 2 connectors and 1 transistor.

It belongs with the usb & debug tools designs in this gallery.

From the project

Board focused on embedded microcontrollers debugging

Black Magic BMP2 Clone ========================================

Black Magic BMP2 is similar to Black Magic Mini but provides connections for several styles of JTAG connectors.

It is an easy-to-use board used for debugging embedded microcontrollers. It supports several targets from manufacturers such as STMicroelectronics, Atmel, Nordic Semiconductor, NXP, Texas Instruments, Freescale, Silicon Labs, Xilinx or Raspberry Pi.

Main components on the Blackmagic bmp2-clone

MCP1802STM32F102CB

Blackmagic bmp2-clone bill of materials (BOM)

32 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MCP1802
U1
1
STM32F102CB
U2
1
FDV304P
Q1
1
8MHz
X1
1
USB_Mini_B
J2
1
FTSH-105-01-F-DV-K
J3
1
SW_Push_Open_Dual
S1
1
green
D1
1
red
D2
2
yellow
D3, D4
2
10u
C1, C2
5
100n
C3, C4, C5, C6, C9
2
18p
C7, C8
1
1k5
R1
2
22R
R2, R3
4
330
R4, R5, R6, R7
2
4k7
R8, R11
3
10k
R9, R10, R12

Blackmagic bmp2-clone design files

The KiCad project lives in the sergiomd4/blackmagic-bmp2-clone repository on GitHub; these links point at the commit this page was built from.

Blackmagic bmp2-clone: common questions

What microcontroller does the Blackmagic bmp2-clone use?

The Blackmagic bmp2-clone is built around the STM32F102CB, from the STM32 family.

How big is the Blackmagic bmp2-clone PCB?

The Blackmagic bmp2-clone measures 58.9 × 28.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Blackmagic bmp2-clone?

32 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Blackmagic bmp2-clone design files?

From the sergiomd4/blackmagic-bmp2-clone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Blackmagic bmp2-clone design in my own project?

Yes, under the terms of its CC0-1.0 license, which sergiomd4 chose for the repository.

Can I test firmware for the Blackmagic bmp2-clone without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards