HardLabs

Blackmagic mini clone

sergiomd4·blackmagic-mini-clone·Hardware/blackmagic_mini.kicad_pcb

Blackmagic mini clone PCB layout, top view — open source STM32 board by sergiomd4

About the Blackmagic mini clone PCB

Blackmagic mini clone is an open source STM32 PCB design by sergiomd4, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 39.1 × 17.2 mm, with 36 components from 22 distinct parts.

Its main chip is the STM32F102CBTx, from the STM32 family. Other key parts include the LP2981-33. By type, the board carries 15 resistors, 9 capacitors, 4 diodes, 3 connectors, 2 ICs and 1 transistor.

From the project

Board focused on embedded microcontrollers debugging

Black Magic Mini Clone ========================================

Black Magic Mini is a reduced version of the Black Magic board in terms of number of components.

It is an easy-to-use board used for debugging embedded microcontrollers. It supports several targets from manufacturers such as STMicroelectronics, Atmel, Nordic Semiconductor, NXP, Texas Instruments, Freescale, Silicon Labs, Xilinx or Raspberry Pi.

Main components on the Blackmagic mini clone

LP2981-33STM32F102CBTx

Blackmagic mini clone bill of materials (BOM)

36 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LP2981-33
U1
1
STM32F102CBTx
U2
1
FDV304P
Q1
1
8 MHz
X1
1
PB53261−04
J1
1
USB_Mini_B
J2
1
X1270WVS-2x05A-6TV01
J3
1
B3U-1000P
S1
1
green
D1
1
red
D2
2
yellow
D3, D4
1
1u
C1
1
3.3u
C2
5
100n
C3, C4, C5, C6, C9
2
27p
C7, C8
1
1k5
R1
2
22
R2, R3
4
390
R4, R5, R6, R7
2
4k7
R8, R11
3
10k
R9, R10, R12
Show 2 more
QtyPartRefs
2
0R
R13, R14
1
1
R15

Blackmagic mini clone design files

The KiCad project lives in the sergiomd4/blackmagic-mini-clone repository on GitHub; these links point at the commit this page was built from.

Blackmagic mini clone: common questions

What microcontroller does the Blackmagic mini clone use?

The Blackmagic mini clone is built around the STM32F102CBTx, from the STM32 family.

How big is the Blackmagic mini clone PCB?

The Blackmagic mini clone measures 39.1 × 17.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Blackmagic mini clone?

36 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Blackmagic mini clone design files?

From the sergiomd4/blackmagic-mini-clone repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Blackmagic mini clone design in my own project?

Yes, under the terms of its CC0-1.0 license, which sergiomd4 chose for the repository.

Can I test firmware for the Blackmagic mini clone without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards