Panel connector
About the Panel connector PCB
Panel connector is an open source PCB design by SFUSatClub, published on GitHub. It is a 2-layer board measuring 95.9 × 90.2 mm, with 206 components from 24 distinct parts.
Other key parts include the SPV1040 and ADG728. By type, the board carries 84 resistors, 66 capacitors, 28 connectors, 12 ICs, 8 diodes and 8 inductors.
From the project
This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
This repository uses the SFU Satellite Team's KiCad component library as a submodule. To start working on the repository:
If you modify either the component schematic or footprint libraries you must push those changes to the SFUSatClub/KiCad-Lib repository.
Main components on the Panel connector
Panel connector bill of materials (BOM)
206 components, 24 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 8 | SPV1040 | TSSOP-8_4.4x3mm_Pitch0.65mm | U100, U110, U120, U130, U140, U150, U160, U170 |
| 4 | ADG728 | TSSOP-16 | U200, U210, U220, U230 |
| 1 | PC104-8BIT | PC104-8bit | J1 |
| 4 | PC104PTH | PC104PTH | J2, J3, J4, J5 |
| 1 | OEM719 | OEM719 | J6 |
| 1 | B3B-XH-A(LF)(SN) | B3B-XH-A | J7 |
| 1 | MOLEX_FFC-14 | MOLEX_FFC-14 | J105 |
| 4 | MOLEX_FFC-14 | MOLEX_FFC-14 | J200, J210, J220, J230 |
| 16 | CONN-TAB | CONN_TAB | J201, J202, J203, J204, J211, J212, J213, J214 +8 |
| 8 | SMM4F5.0A-TR | SMM4F | D100, D110, D120, D130, D140, D150, D160, D170 |
| 8 | L_10u0_10%_1.42A_2-SMD, | L_2220 | L100, L110, L120, L130, L140, L150, L160, L170 |
| 18 | DNP | C_0402 | C1, C2, C200, C201, C202, C203, C210, C211 +10 |
| 16 | 10uF | C_0805 | C100, C104, C110, C114, C120, C124, C130, C134 +8 |
| 8 | 100nF | C_0805 | C101, C111, C121, C131, C141, C151, C161, C171 |
| 8 | 1n0F | C_0805 | C102, C112, C122, C132, C142, C152, C162, C172 |
| 8 | 1u0F | C_0805 | C103, C113, C123, C133, C143, C153, C163, C173 |
| 8 | 4u7F | C_0805 | C105, C115, C125, C135, C145, C155, C165, C175 |
| 14 | DNP | R_0402 | R1, R2, R200, R202, R203, R210, R213, R214 +6 |
| 22 | 0R | R_0402 | R3, R4, R101, R111, R121, R131, R141, R151 +14 |
| 8 | 1K | R_0805 | R100, R110, R120, R130, R140, R150, R160, R170 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 16 | 1k0 | R_0805 | R102, R103, R112, R113, R122, R123, R132, R133 +8 |
| 8 | 10m0 | R_1206 | R104, R114, R124, R134, R144, R154, R164, R174 |
| 8 | 1M0 | R_0805 | R105, R115, R125, R135, R145, R155, R165, R175 |
| 8 | 357k | R_0805 | R106, R116, R126, R136, R146, R156, R166, R176 |
Panel connector design files
The KiCad project lives in the SFUSatClub/panel-connector repository on GitHub; these links point at the commit this page was built from.
Panel connector: common questions
How big is the Panel connector PCB?
The Panel connector measures 95.9 × 90.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Panel connector?
206 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Panel connector design files?
From the SFUSatClub/panel-connector repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Panel connector design in my own project?
The repository has no license, so all rights stay with SFUSatClub. Use it as a reference, and ask the author before reusing the design.