MiniExperimenterProjects
shabaz123·MiniExperimenterProjects·RemoteControlDetector/remote_control_detector.kicad_pcb
About the MiniExperimenterProjects PCB
MiniExperimenterProjects is an open source PCB design by shabaz123, published on GitHub. It is a 2-layer board measuring 50 × 25 mm, with 9 components from 7 distinct parts.
Other key parts include the TL1838. By type, the board carries 3 resistors, 2 connectors, 1 IC, 1 transistor, 1 diode and 1 capacitor.
From the project
This project can be used to detect infra-red remote controls!
This project can be used to detect infra-red remote controls!
Press a button on any remote control (well, infra-red based remote controls) such as a TV remote, and the light-emitting diode (LED) will flash!
All TVs contain a little integrated circuit (IC) that senses light with an internal photodiode, and then amplifies the signal provided it is changing rapidly (at about 38 kHz). An output signal indicates the presence of the rapidly changing light. The circuit uses such an integrated circuit, part code TL1838.
Main components on the MiniExperimenterProjects
MiniExperimenterProjects bill of materials (BOM)
9 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL1838 | TL1838 | U1 |
| 1 | BC547 | TO-92_Wide_BJT | Q1 |
| 2 | ~ | Terminal-Single-Hole-1mm | J1, J2 |
| 1 | LED | LED_3mm | D1 |
| 1 | 10u | CP_Radial_D5.0mm_P2.50mm | C1 |
| 2 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 220R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
MiniExperimenterProjects design files
The KiCad project lives in the shabaz123/MiniExperimenterProjects repository on GitHub; these links point at the commit this page was built from.
MiniExperimenterProjects: common questions
How big is the MiniExperimenterProjects PCB?
The MiniExperimenterProjects measures 50 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MiniExperimenterProjects?
9 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the MiniExperimenterProjects design files?
From the shabaz123/MiniExperimenterProjects repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MiniExperimenterProjects design in my own project?
The repository has no license, so all rights stay with shabaz123. Use it as a reference, and ask the author before reusing the design.