HardLabs

Pcb mcu stm32c0

shishir-dey·pcb-mcu-stm32c0·src/pcb-mcu-stm32c0.kicad_pcb

Pcb mcu stm32c0 layout, top view — open source STM32 board by shishir-dey

About the Pcb mcu stm32c0

Pcb mcu stm32c0 is an open source STM32 PCB design by shishir-dey, published on GitHub under the MIT license. It is a 2-layer board measuring 22 × 42 mm, with 4 components from 4 distinct parts.

Its main chip is the STM32C031K4Tx, from the STM32 family. By type, the board carries 2 capacitors and 1 IC.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

An STM32C031 microcontroller with M.2 B+M key connector

Main components on the Pcb mcu stm32c0

STM32C031K4Tx

Pcb mcu stm32c0 bill of materials (BOM)

4 components, 4 distinct parts.

QtyPartRefs
1
STM32C031K4Tx
U1
1
M.2-B+M-KEY
11
1
4.7uF
C1
1
100nF
C2

Pcb mcu stm32c0 design files

The KiCad project lives in the shishir-dey/pcb-mcu-stm32c0 repository on GitHub; these links point at the commit this page was built from.

Pcb mcu stm32c0: common questions

What microcontroller does the Pcb mcu stm32c0 use?

The Pcb mcu stm32c0 is built around the STM32C031K4Tx, from the STM32 family.

How big is the Pcb mcu stm32c0?

The Pcb mcu stm32c0 measures 22 × 42 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb mcu stm32c0?

4 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Pcb mcu stm32c0 design files?

From the shishir-dey/pcb-mcu-stm32c0 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Pcb mcu stm32c0 design in my own project?

Yes, under the terms of its MIT license, which shishir-dey chose for the repository.

Can I test firmware for the Pcb mcu stm32c0 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards