4,287 open source boards in Dev boards & breakouts
Development boards, breakouts, shields, HATs and carrier boards. Every board here is a public GitHub project with its KiCad files, read for size, layers and parts. Pick one close to your design and simulate its firmware on HardLabs before you build it.
Nordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865RP2040/RP2350
Easyduino RP2040
Hanqaqa
21 × 51 mm44 parts4LCERN-OHL-P-2.0754FPGA
Radioberry
pa3gsb
65 × 56 mm143 parts4LNo license675ESP32
Esp rust board
esp-rs
22.9 × 63.5 mm48 parts2LNo license648STM32
L0
Luos-io
20.3 × 24.5 mm44 parts2LMIT547FPGA
Orangecrab hardware
orangecrab-fpga
50.8 × 22.9 mm141 parts6LNo license546ESP32
ESP32
Chrismettal
66.4 × 48.1 mm70 parts2LCC-BY-SA-4.0451Parallella Porcupine Breakout Board, Ver. 2
parallella
80 × 49.3 mm32 parts6LCustom license422ESP32
ESP32-PoE Rev K
OLIMEX
28 × 80 mm131 parts4LApache-2.0407STM32
Hydrabus
hydrabus
60 × 37 mm60 partsNo license356RF Detector Board
PantsForBirds
28 × 44 mm24 parts2LGPL-3.0322Volumetric display
idlehandsdev
23 × 120 mm70 parts2LCC-BY-SA-4.0312ESP32
ESP32-EVB Rev J
OLIMEX
75.2 × 74.7 mm157 parts2LApache-2.0287KLOTZ split keyboard
GEIGEIGEIST
120.6 × 85.5 mm50 parts2LGPL-3.0285NXP
Teensy eurorack
newdigate
118.1 × 101.6 mm100 parts2LMIT258Relatively-Universal-ROM-Programmer
AndersBNielsen
68.8 × 53.6 mm141 parts2LGPL-3.0256RP2040/RP2350
Vaio re
CRImier
75 × 65 mm274 parts4LGPL-3.0254Raspberry Pi Hat - iMac G3
qbancoffee
65 × 56.5 mm32 parts2LLGPL-3.0239XassetteAsterisk
SdtElectronics
56 × 56 mm137 parts2LCERN-OHL-W-2.0229FPGA
Butterstick hardware
butterstick-fpga
80 × 49 mm222 parts6LCERN-OHL-1.2221STM32
MMDVM HS Dual Hat
phl0
65 × 56 mm117 parts2LNo license216Breadbee
breadbee
32 × 30 mm76 parts4LGPL-3.0211ESP8266
ME-ESP8266
MaloufSleep
66.8 × 34 mm73 parts2LMIT204STM32
MMDVM HS Hat
mathisschmieder
65.1 × 30.2 mm79 parts4LNo license200M5Pi-F1C100S/200S
imliubo
47.5 × 50 mm141 parts4LNo license197Pmw3360 pcb ffc
siderakb
27 × 22.5 mm13 parts2LCERN-OHL-P-2.01948-Bit CPU 32k
slu4coder
196.9 × 125.1 mm101 parts2LNo license184ShieldXL
okyeron
132.5 × 84.8 mm91 parts2LGPL-3.0175Sharp memory display breakout
karnadii
35.6 × 22 mm11 parts2LCERN-OHL-P-2.0169Zmk apple desktop bus keyboard
mattchesters
126.6 × 21.4 mm12 parts2LMIT165STM32
OtterPill
Jana-Marie
43.2 × 17.6 mm42 parts2LCERN-OHL-S-2.0162Tairakb
strayer
151.5 × 121.2 mm70 parts2LMIT161${Title}
corrados
120 × 70 mm92 parts2LGPL-2.0159MRF-Pro v8-breakout
acornelissen
21 × 15.5 mm11 parts2LGPL-3.0157
Open source development boards and breakouts at a glance
The gallery holds 4287 open source development boards and breakouts from 2977 GitHub repositories; a typical one measures about 55.9 × 52 mm and carries around 29 components.
76% are two-layer designs, the rest use four layers or more, and 51% carry an open source license.
The most starred is TOTEM by GEIGEIGEIST.
Parts most used on development boards and breakouts
Microcontrollers on development boards and breakouts
Open source development boards and breakouts: common questions
Where can I find open source development boards and breakouts?
This page lists 4287, each read from its KiCad files on GitHub: board size, layers, the full parts list and a render of the PCB, with links to the original repository.
What parts are most common on development boards and breakouts?
The AMS1117-3.3, RP2040, USBLC6-2SC6, W25Q128JVS and AP2112K-3.3 appear in the most repositories here.
Which microcontrollers do development boards and breakouts use?
Most are built on ESP32 (439), AVR/Arduino (379), STM32 (331) and RP2040/RP2350 (295).
How big is a typical development board?
The median is 55.9 × 52 mm, and 76% are two-layer designs.
What is the most popular open source development board?
By GitHub stars, TOTEM by GEIGEIGEIST, with 2,042 stars.
Can I simulate one of these development boards and breakouts before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.