Usbhid testfixture
shraken·usbhid_buddy·robot/hw/v0.2/source/usbhid_testfixture.kicad_pcb
About the Usbhid testfixture PCB
Usbhid testfixture is an open source PCB design by shraken, published on GitHub. It is a 4-layer board measuring 108.6 × 38.6 mm, with 37 components from 18 distinct parts.
Other key parts include the MCP1802T-3302I/OT, C8051F380, TLV5630, TPS60241 and REF3325AIDBZR. By type, the board carries 23 resistors, 5 ICs, 4 connectors, 3 capacitors and 2 diodes.
From the project
Hardware, firmware, and software for the USBHID DAQ 'Buddy' device
This repo contains the manufacturing automated test system for the Buddy USB HID DAQ hardware device.
The automated test board mates with a Teensy 3.6 microcontroller for measurement and stimulus of the "Buddy" DAQ under test. - teensy/ - teensy Arduino firmware for the DUT test software - sw/ - host based robot framework source files to be run by tester - hw/ - PCB schematic, layout, and datasheet files
Main components on the Usbhid testfixture
Usbhid testfixture bill of materials (BOM)
37 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1802T-3302I/OT MAX335 | TSSOP-24_4.4x7.8mm_Pitch0.65mm | U1 |
| 1 | C8051F380 MAX335 | TSSOP-24_4.4x7.8mm_Pitch0.65mm | U2 |
| 1 | TLV5630 74AHC1G125 | SOT-23-5 | U3 |
| 1 | TPS60241 74AHC1G125 | SOT-23-5 | U4 |
| 1 | REF3325AIDBZR MAX4617 | TSSOP-16_4.4x5mm_Pitch0.65mm | U5 |
| 2 | Conn_01x24 | Pin_Header_Straight_1x24_Pitch2.54mm | J1, J2 |
| 1 | Conn_02x05_Odd_Even | Socket_Strip_Straight_2x05_Pitch2.54mm | J4 |
| 1 | CONN_01X02 BTE-020-01-F-D | BTE-020-01-F-D-A | P1 |
| 2 | LED | LED_0603_HandSoldering | D1, D2 |
| 2 | 100NF 0.1uF | C_0603_HandSoldering | C1, C3 |
| 1 | 1UF 0.1uF | C_0603_HandSoldering | C2 |
| 1 | 100R 10k | R_0603_HandSoldering | R1 |
| 8 | 10k | R_0603_HandSoldering | R2, R3, R4, R5, R8, R9, R18, R19 |
| 2 | 10K 1k | R_0603_HandSoldering | R6, R7 |
| 3 | 10K 10k | R_0603_HandSoldering | R10, R16, R17 |
| 1 | 0R_NM 10k | R_0603_HandSoldering | R11 |
| 7 | 5.1k | R_0603_HandSoldering | R12, R13, R14, R20, R21, R22, R23 |
| 1 | 10K 5.1k | R_0603_HandSoldering | R15 |
Usbhid testfixture design files
The KiCad project lives in the shraken/usbhid_buddy repository on GitHub; these links point at the commit this page was built from.
Usbhid testfixture: common questions
How big is the Usbhid testfixture PCB?
The Usbhid testfixture measures 108.6 × 38.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Usbhid testfixture?
37 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usbhid testfixture design files?
From the shraken/usbhid_buddy repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Usbhid testfixture design in my own project?
The repository has no license, so all rights stay with shraken. Use it as a reference, and ask the author before reusing the design.