Aerionix BLDC health
Shubham-Khandelwal1·Aerionix_BLDC_health·bldc_health/bldc_health.kicad_pcb
About the Aerionix BLDC health PCB
Aerionix BLDC health is an open source STM32 PCB design by Shubham-Khandelwal1, published on GitHub. It is a 2-layer board measuring 35.4 × 35.3 mm, with 49 components from 28 distinct parts.
Its main chip is the UFQFPN-48_L7.0-W7.0-P0.50-TL-EP5.6, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 20 capacitors, 12 resistors, 4 ICs, 3 connectors, 2 fuses and 2 switches.
It belongs with the robotics & motion designs in this gallery.
Main components on the Aerionix BLDC health
Aerionix BLDC health bill of materials (BOM)
49 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ ST(意法半导体) | UFQFPN-48_L7.0-W7.0-P0.50-TL-EP5.6 | U1 |
| 1 | ~ ST(意法半导体) | LGA-14_L3.0-W2.5-P0.50-TL | U2 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | ~ TDK InvenSense(应美盛) | LGA-24_L3.0-W3.0-P0.40-TL | U4 |
| 1 | Crystal | Crystal_SMD_HC49-SD | Y1 |
| 1 | UART | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SERIAL | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_Amphenol_124019772112A | J3 |
| 2 | Polyfuse_Small | Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder | F1, F2 |
| 1 | Reset | SW_TS09-63-25-WT-160-SMT-TR | SW1 |
| 1 | SW_SPDT | SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW2 |
| 1 | 10k | PinHeader_1x02_P1.00mm_Vertical | Thermistor1 |
| 1 | 5V LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | debug_led | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 2 | 120R | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2 |
| 5 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C10, C19 |
| 2 | 33p | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C6 |
| 3 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5, C16, C17 |
| 1 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 2 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C12 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 5 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C11, C13, C14, C15 |
| 1 | 10N | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18 |
| 1 | 2.2u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C20 |
| 1 | 500 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 7 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R5, R6, R7, R9, R10 |
| 1 | 1k5 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 2 | 5k1 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R11, R12 |
Aerionix BLDC health design files
The KiCad project lives in the Shubham-Khandelwal1/Aerionix_BLDC_health repository on GitHub; these links point at the commit this page was built from.
Aerionix BLDC health: common questions
What microcontroller does the Aerionix BLDC health use?
The Aerionix BLDC health is built around the UFQFPN-48_L7.0-W7.0-P0.50-TL-EP5.6, from the STM32 family.
How big is the Aerionix BLDC health PCB?
The Aerionix BLDC health measures 35.4 × 35.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Aerionix BLDC health?
49 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Aerionix BLDC health design files?
From the Shubham-Khandelwal1/Aerionix_BLDC_health repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Aerionix BLDC health design in my own project?
The repository has no license, so all rights stay with Shubham-Khandelwal1. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Aerionix BLDC health without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k