Aracde button 24mm 4x4 2 - 3
About the Aracde button 24mm 4x4 2 - 3 PCB
Aracde button 24mm 4x4 2 - 3 is an open source PCB design by silveirago, published on GitHub. It is a 2-layer board measuring 118 × 118 mm, with 90 components from 10 distinct parts.
By type, the board carries 32 diodes, 32 capacitors, 16 switches and 7 connectors.
From the project
My Kicad libs
Aracde button 24mm 4x4 2 - 3 bill of materials (BOM)
90 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | Conn_01x06_Female | pad_connector_small_6 | 4067_pads, 4067_pads1, 4067_pads3, 4067_pads4 |
| 3 | Conn_01x02_Female | pad_connector_small_2 | ws2812b_pads, ws2812b_pads1, ws2812b_pads4 |
| 1 | CD74HC4067M | SSOP-24_5.3x8.2mm_P0.65mm | 74hc4067 |
| 1 | Conn_01x07_Female | PinHeader_1x07_P2.54mm_Vertical | 4067_pins |
| 16 | SW_SPST | Arcade button 24mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +8 |
| 1 | Conn_01x04_Female | PinHeader_1x04_P2.54mm_Vertical | ws2812b_pins |
| 9 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D25, D26, D27, D28, D29, D30, D31 +1 |
| 23 | C114583 WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D2, D3, D4, D5, D6, D7, D8, D9 +15 |
| 24 | C14663 100nF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +16 |
| 8 | 100nF | C_0603_1608Metric | C25, C26, C27, C28, C29, C30, C31, C32 |
Aracde button 24mm 4x4 2 - 3 design files
The KiCad project lives in the silveirago/Kicad-Gustavo repository on GitHub; these links point at the commit this page was built from.
Aracde button 24mm 4x4 2 - 3: common questions
How big is the Aracde button 24mm 4x4 2 - 3 PCB?
The Aracde button 24mm 4x4 2 - 3 measures 118 × 118 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Aracde button 24mm 4x4 2 - 3?
90 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Aracde button 24mm 4x4 2 - 3 design files?
From the silveirago/Kicad-Gustavo repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Aracde button 24mm 4x4 2 - 3 design in my own project?
The repository has no license, so all rights stay with silveirago. Use it as a reference, and ask the author before reusing the design.
