RGBPlug-P
Sirotaca·RGBPlug-P·KiCad/RGBPlug_P.kicad_pcb
About the RGBPlug-P PCB
RGBPlug-P is an open source PCB design by Sirotaca, published on GitHub under the CC0-1.0 license. It is a 2-layer board measuring 43.7 × 26.2 mm, with 20 components from 13 distinct parts.
Other key parts include the LMH1980 and 74LVC3G34. By type, the board carries 10 capacitors, 4 resistors, 3 connectors, 2 ICs and 1 switch.
From the project
Compact RGBS/RGBHV adapter for the PlayStation AV multi-out
Main components on the RGBPlug-P
RGBPlug-P bill of materials (BOM)
20 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LMH1980 | VSSOP-10_3x3mm_P0.5mm | U1 |
| 1 | 74LVC3G34 | TSSOP-8_3x3mm_P0.65mm | U2 |
| 1 | DB15_FEMALE_HIGHDENSITY_MOUNTINGHOLES DB15_Female_HighDensity_MountingHoles | L17HTHES4F1C | J1 |
| 1 | AUDIOJACK3 AudioJack3 | Jack_3.5mm_CUI_SJ1-3533NG_Horizontal | J2 |
| 1 | PlayStation_multiAV_PCB | PlayStation_multiAV_PCB | P1 |
| 1 | JS202011CQN | SW_CuK_JS202011CQN_DPDT_Straight | S1 |
| 4 | 0.01UF 0.01uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6, C8, C10 |
| 1 | 10UF 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 2 | 0.1UF 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4 |
| 3 | 1000UF 1000uF | CP_Radial_D6.3mm_P2.50mm | C5, C7, C9 |
| 1 | 75 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 10K 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 2 | 510 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
RGBPlug-P design files
The KiCad project lives in the Sirotaca/RGBPlug-P repository on GitHub; these links point at the commit this page was built from.
- LayoutKiCad/RGBPlug_P.kicad_pcb
- SchematicKiCad/RGBPlug_P.kicad_sch
- BOMBOM.csv
RGBPlug-P: common questions
How big is the RGBPlug-P PCB?
The RGBPlug-P measures 43.7 × 26.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RGBPlug-P?
20 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RGBPlug-P design files?
From the Sirotaca/RGBPlug-P repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RGBPlug-P design in my own project?
Yes, under the terms of its CC0-1.0 license, which Sirotaca chose for the repository.