ParPortProp

skiselev·ParPortProp·KiCad/PPP.net

ParPortProp

About the ParPortProp PCB

ParPortProp is an open source PCB design by skiselev, published on GitHub. It is a board, with 1 components from 1 distinct parts.

It belongs with the keyboards and audio designs in this gallery.

From the project

VGA, PS/2 keyboard, SD card interface, and speaker extension board for Zeta SBC

The ParPortProp (Parallel Port Propeller) board allows extending Zeta and N8VEM SBCs with VGA, PS/2 keyboard, SD card interfaces and a speaker. It is based on Parallax Propeller microcontroller. The ParPortProp design is similar to PropIO and PockeTerm, but it interfaces to a 8255 PPI based parallel port.

ParPortProp provides following capabilities: VGA output with 64 colors support PS/2 compatible keyboard interface SD card interface RS 232 serial port (3 wires - RX, TX, and GND signals only). Serial port can be used for programming the Propeller firmware in on-board EEPROM. Speaker…

ParPortProp bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
80-C323C104K5R
0.1 uF ceramic, 5.08 mm lead spacing
C1

ParPortProp design files

The KiCad project lives in the skiselev/ParPortProp repository on GitHub; these links point at the commit this page was built from.

ParPortProp: common questions

How many components are on the ParPortProp?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ParPortProp design files?

From the skiselev/ParPortProp repository on GitHub, which has a netlist and the BOM; the links under Design files point to each one.

Can I use the ParPortProp design in my own project?

The repository has no license, so all rights stay with skiselev. Use it as a reference, and ask the author before reusing the design.

Similar boards