Inverter panelized
About the Inverter panelized PCB
Inverter panelized is an open source PCB design by SlenderN679, published on GitHub. It is a 2-layer board measuring 91.5 × 65.3 mm, with 137 components from 29 distinct parts.
Other key parts include the TMR_1-1215 and TL494. By type, the board carries 34 resistors, 21 capacitors, 16 transistors, 11 connectors, 6 diodes and 4 ICs.
From the project
Projeto de um Inversor Trifásico com Controlo Digital assente num STM32H755. Implementa modulação SPWM a 25 kHz, controlo escalar V/f e um Retificador Monofásico Ativo (AFE) com fator de potência unitário. Desenvolvido no GEPE - Universidade do Minho.
O objetivo principal deste sistema é ultrapassar as limitações dos sistemas de controlo analógico (como a suscetibilidade ao ruído e restrições na precisão), transferindo a lógica de comutação e modulação para o domínio digital através de um microcontrolador STM32 NUCLEO-H755ZI-Q.
Projeto desenvolvido com o apoio do GEPE (Grupo de Eletrónica de Potência e Energia) e do NEEEICUM (Núcleo de Estudantes de Engenharia Eletrónica Industrial e Computadores) da Universidade do Minho, Guimarães.
Main components on the Inverter panelized
Inverter panelized bill of materials (BOM)
137 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TMR_1-1215 | Converter_DCDC_TRACO_TEA1-xxxxHI_THT | U1 |
| 3 | TL494 | DIP-16_W7.62mm | U2, U3, U5 |
| 10 | 600V40A | TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 +2 |
| 3 | BC546 | TO-92_Inline_Wide_CBE | Q11, Q12, Q13 |
| 3 | BC547 | TO-92_Inline_Wide_CBE | Q14, Q15, Q16 |
| 3 | Conn_01x02_Socket | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1, J3, J10 |
| 3 | Conn_01x03_Pin | 3pin_Magnet_5360 | J2, J7, J8 |
| 2 | Conn_01x14_Socket | JST_ZE_B14B-ZESK-D_1x14_P1.50mm_Vertical | J4, J5 |
| 2 | Conn_01x04_Pin | 4pin_Magnet_5358 | J6, J9 |
| 1 | Conn_01x12_Socket | JST_ZE_B12B-ZESK-D_1x12_P1.50mm_Vertical | J12 |
| 12 | D_Zener_Generic | D_DO-34_SOD68_P10.16mm_Horizontal | DZ1, DZ2, DZ3, DZ4, DZ5, DZ6, DZ7, DZ8 +4 |
| 1 | Fuse | Fuseholder_Clip-5x20mm_Littelfuse_111_Lateral_P18.80x5.00mm_D1.17mm_Horizontal | F1 |
| 10 | Heatsink_Pad | Heatsink_Fischer_SK129-STS_42x25mm_2xDrill2.5mm | HS1, HS2, HS3, HS4, HS5, HS6, HS7, HS8 +2 |
| 1 | Ammeter_DC | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | MES1 |
| 1 | Voltmeter_DC | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | MES2 |
| 6 | HCPL-3120 | DIP-8_W7.62mm_LongPads | OC1, OC2, OC3, OC4, OC5, OC6 |
| 1 | VTX-214-015-115 | Converter_ACDC_Vigortronix_VTX-214-015-1xx_THT | PS1 |
| 12 | Resistor | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R_G1, R_G2, R_G3, R_G4, R_G5, R_G6, R_GS1, R_GS2 +4 |
| 1 | 1:1 | Transformer_NF_ETAL_1-1_P1200 | TR1 |
| 6 | LED | LED_D5.0mm | D1, D2, D3, D4, D5, D6 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1000u350V | CP_Radial_D35.0mm_P10.00mm_SnapIn | C1, C20, C21 |
| 3 | 1u | CP_Radial_D5.0mm_P2.00mm | C2, C9, C11 |
| 6 | 0.1u | C_Disc_D3.0mm_W2.0mm_P2.50mm | C3, C7, C8, C15, C16, C19 |
| 3 | Capacitor_NP | C_Disc_D3.0mm_W2.0mm_P2.50mm | C4, C13, C17 |
| 3 | 22n | C_Disc_D10.5mm_W5.0mm_P5.00mm | C5, C10, C12 |
| 3 | 100n | C_Disc_D10.5mm_W5.0mm_P5.00mm | C6, C14, C18 |
| 27 | Resistor | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +19 |
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R23, R25, R27 |
| 4 | 2.2k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R24, R26, R28, R29 |
Inverter panelized design files
The KiCad project lives in the SlenderN679/Inversor-trifasico-digital repository on GitHub; these links point at the commit this page was built from.
Inverter panelized: common questions
How big is the Inverter panelized PCB?
The Inverter panelized measures 91.5 × 65.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Inverter panelized?
137 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Inverter panelized design files?
From the SlenderN679/Inversor-trifasico-digital repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Inverter panelized design in my own project?
The repository has no license, so all rights stay with SlenderN679. Use it as a reference, and ask the author before reusing the design.
