11 open source boards using the TL494

Real designs built with the TL494, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TL494

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TL494 connects to, and the resistors, capacitors and other passives placed on it.

  • The 1IN- pin has a series resistor on 6 of 7 designs, most often 51 kΩ (then 510 Ω).
  • The CT pin has a capacitor to GND on 6 of 7 designs, most often 1 nF (then 100 nF).
  • The 1IN+ pin has a series resistor on 5 of 7 designs, most often 39 kΩ (then 2.2 kΩ).
  • The FB pin has a series resistor on 5 of 7 designs, most often 51 kΩ (then 50 kΩ).
1IN+pin 1Connected to: A connector 29%
  • Series resistor on 71% · 39 kΩ (1), 2.2 kΩ (1), 8.2 kΩ (1)
  • Resistor to GND on 57% · 10 kΩ (1), 4.7 kΩ (1), 1 kΩ (1)
1IN-pin 2Connected to: Signal 86%
  • Series resistor on 86% · 51 kΩ (2), 510 Ω (1), 4.7 kΩ (1)
FBpin 3Connected to: Signal 71% · not connected 29%
  • Series resistor on 71% · 51 kΩ (2), 50 kΩ (1), 1 MΩ (1)
DTCpin 4Connected to: Signal 57% · GND 43%
  • Series capacitor on 43% · 100 nF (3), 2.2 µF (1)
CTpin 5Connected to: Signal 100%
  • Capacitor to GND on 86% · 1 nF (3), 100 nF (1), 2.2 nF (1)
RTpin 6Connected to: Signal 100%
  • Resistor to GND on 71% · 1 kΩ (1), 22 kΩ (1), 4.7 kΩ (1)
GNDpin 7Connected to: GND 86%
C1pin 8Connected to: Signal 86%
  • Series resistor on 43% · 1 kΩ (1), 150 Ω (1)
  • Pull-up to 12V on 43% · 560 Ω (1), 10 kΩ (1), 18 kΩ (1)
E2pin 10Connected to: Signal 57% · GND 43%
  • Resistor to GND on 43% · 220 Ω (1), 1 kΩ (1), 18 kΩ (1)
C2pin 11Connected to: Signal 71% · 12V 29%
  • Series resistor on 43% · 1 kΩ (1), 150 Ω (1)
VCCpin 12Connected to: 12V 86%
OUTCTRLpin 13Connected to: GND 71%
REFpin 14Connected to: Signal 57% · VREF 29%
  • Series resistor on 43% · 8.9 kΩ (1), 4.7 kΩ (1), 10 kΩ (1)
2IN-pin 15Connected to: Signal 57% · not connected 43%
  • Series resistor on 57% · 1 kΩ (1), 4.7 kΩ (1), 10 kΩ (1)
2IN+pin 16Connected to: Signal 57% · GND 29%
  • Series resistor on 43% · 100 Ω (1), 10 kΩ (1), 5.1 kΩ (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Power SMPS by Synthron, Pwm tl494cn by jonronen, BBBC by Lee34667 and Dc dc 250w tl494 by picli3.

The TL494 in open source designs

The gallery holds 11 open source boards using the TL494 from 7 GitHub repositories; a typical one measures about 91.5 × 65.5 mm and carries around 39 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Power SMPS by Synthron.

Microcontrollers on boards using the TL494

What boards using the TL494 are built for

TL494: common questions

Where can I find a TL494 reference design?

Each of the 11 boards on this page is a real design using the TL494. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TL494 1IN- pin?

The 1IN- pin has a series resistor on 6 of 7 designs, most often 51 kΩ (then 510 Ω). Counted from the KiCad layouts of 7 open source designs using the TL494.

How is the TL494 CT pin connected?

The CT pin has a capacitor to GND on 6 of 7 designs, most often 1 nF (then 100 nF). Counted from the KiCad layouts of 7 open source designs using the TL494.

What resistor goes on the TL494 1IN+ pin?

The 1IN+ pin has a series resistor on 5 of 7 designs, most often 39 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 7 open source designs using the TL494.

Which microcontrollers do boards using the TL494 use?

Most are built on STM32 (1).

How big is a typical board using the TL494?

The median is 91.5 × 65.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the TL494?

By GitHub stars, Power SMPS by Synthron, with 3 stars.

Can I simulate one of these boards using the TL494 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part