Mini remote

smrq·mini-remote·pcb/mini-remote.kicad_pcb

Mini remote PCB layout, top view — open source STM32 board by smrq

About the Mini remote PCB

Mini remote is an open source STM32 PCB design by smrq, published on GitHub. It is a board measuring 45.5 × 98 mm, with 33 components from 13 distinct parts.

Its main chip is the STM8L101F3P, from the STM32 family. By type, the board carries 20 switches, 4 resistors, 2 connectors, 2 diodes, 2 capacitors and 1 IC.

From the project

Tiny universal remote PCB and firmware

The design for the PCB was done in KiCad. The PCB is designed according to the specifications of manufacturing with JLCPCB.

U1 STMicroelectronics STM8L101F3P3 STM8L101F3P6 is fine too * Any STM8L101FxPy is probably ok as long as the firmware can be squished to fit

D1 940nm IR LED (Everlight IR333/H0/L10) D2 2x3x4 LED, red (Chanzon) * Or whatever LEDs you have lying around really

Main components on the Mini remote

Mini remote bill of materials (BOM)

33 components, 13 distinct parts.

QtyPartRefs
1
STM8L101F3P
U1
1
MMBT3906
Q1
1
Conn_01x04
J1
1
Conn_01x02
J2
1
CR2032
BT1
20
SW_SPST
SW1, SW3, SW4, SW5, SW6, SW7, SW8, SW10 +12
1
IRLED
D1
1
LED
D2
2
100nF
C1, C2
1
22
R1
1
2K7
R2
1
1k
R3
1
10K
R4

Mini remote design files

The KiCad project lives in the smrq/mini-remote repository on GitHub; these links point at the commit this page was built from.

Mini remote: common questions

What microcontroller does the Mini remote use?

The Mini remote is built around the STM8L101F3P, from the STM32 family.

How big is the Mini remote PCB?

The Mini remote measures 45.5 × 98 mm and is 1.6002 mm thick.

How many components are on the Mini remote?

33 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Mini remote design files?

From the smrq/mini-remote repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Mini remote design in my own project?

The repository has no license, so all rights stay with smrq. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mini remote without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards