Dermasense vishwakarma-2026

soham0777·dermasense-vishwakarma-2026·6_electronics/kicad/reader_v0_1.kicad_sch

This repository ships a schematic but no board layout.

About the Dermasense vishwakarma-2026 PCB

Dermasense vishwakarma-2026 is an open source PCB design by soham0777, published on GitHub under the MIT license. It is a board, with 17 components from 10 distinct parts.

By type, the board carries 9 resistors, 4 connectors, 3 diodes and 1 capacitor.

It belongs with the iot & wireless designs in this gallery.

From the project

Dermasense: a laser-written two-zone strip + clip-on reader that reads a wound dressing's own change line. Vishwakarma Awards 2026-27, Stage 2 design (not yet built).

Status: - ERC passes: 0 violations at every severity (KiCad 10.0.6). - Netlist cross-checked against the firmware: 0 mismatches. - No PCB yet. The bench reader is built on perfboard from modules (7firmware/WIRING.md`). A PCB is justified only after the bench test and E4.

Circuit in one line: each zone is driven through 1 kΩ from a GPIO into node N, which returns through a 100 kΩ 0.1 % reference resistor. The ADS1115 reads N, and the polarity is swapped every scan, so the strip sees no net DC. A second 100 kΩ resistor checks the reader itself. The values are justified in…

Dermasense vishwakarma-2026 bill of materials (BOM)

17 components, 10 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SuperMini left header
J1
1
SuperMini right header
J2
1
ADS1115 module header
J3
1
Strip pads (pogo P75-B1)
J4
1
LED green OK
D1
1
LED amber CHANGE
D2
1
LED red CHECK/FAULT
D3
1
10nF C0G
C1
7
1k
R1, R2, R3, R4, R7, R8, R9
2
100k 0.1%
R5, R6

Dermasense vishwakarma-2026 design files

The KiCad project lives in the soham0777/dermasense-vishwakarma-2026 repository on GitHub; these links point at the commit this page was built from.

Dermasense vishwakarma-2026: common questions

How many components are on the Dermasense vishwakarma-2026?

17 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dermasense vishwakarma-2026 design files?

From the soham0777/dermasense-vishwakarma-2026 repository on GitHub, which has the schematic, a netlist and the BOM; the links under Design files point to each one.

Can I use the Dermasense vishwakarma-2026 design in my own project?

Yes, under the terms of its MIT license, which soham0777 chose for the repository.

Similar boards