ESC

someonelse20·ESC·hardware/ESC.kicad_pcb

ESC PCB layout, top view — open source STM32 board by someonelse20

About the ESC PCB

ESC is an open source STM32 PCB design by someonelse20, published on GitHub. It is a 4-layer board measuring 65 × 30 mm, with 89 components from 34 distinct parts.

Its main chip is the STM32G431CBTx, from the STM32 family. Other key parts include the DRV8323SRTAR and LMR16006X. By type, the board carries 36 capacitors, 27 resistors, 10 connectors, 7 transistors, 3 ICs and 3 inductors.

It belongs with the robotics & motion designs in this gallery.

From the project

Custom electronic speed controller

A custom designed electronic speed controller that supports up to 7 cell LiPo batteries with 30 amps (untested). I made this as part of my overall project of making a drone from scratch.

Pull the Direction pin low (default) for clockwise rotation or high (3.3v) for counter clockwise rotation. Alternatively, leave the solder bridge on the bottom of the board open for clockwise and closed for counter clockwise.

ESC, from the project README
From the project README

Main components on the ESC

ESC bill of materials (BOM)

89 components, 34 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
DRV8323SRTAR
U1
1
STM32G431CBTx
U2
1
LMR16006X
U3
6
AGM60P30AP
Q1, Q2, Q3, Q4, Q5, Q6
1
AGM60P30A
Q7
1
X322516MLB4SI
Y1
4
+
J1, J4, J5, J6
1
-
J2
4
+
J3, J8, J9, J10
1
Conn_01x03
J7
1
D_Schottky
D1
1
SMBJ30A
D2
2
FerriteBead
FB1, FB2
1
27uH
L1
6
10nF
C1, C2, C3, C4, C5, C6
2
1uF
C9, C42
1
47nF
C11
8
1nF
C15, C16, C17, C22, C23, C25, C32, C34
4
100uF
C18, C19, C20, C35
8
100nF
C21, C26, C27, C28, C30, C40, C41, C43
Show 14 more
QtyPartRefs
2
8.2pF
C24, C33
1
1uF
C29
1
10uF
C31
1
10uF
C37
2
15uF
C38, C39
6
10
R1, R2, R5, R6, R8, R9
3
1M
R3, R4, R7
1
1K
R13
7
226K
R16, R18, R21, R22, R24, R26, R27
5
28K
R17, R19, R23, R25, R29
1
1K
R20
1
100K
R28
1
8.45K
R30
2
10k
R31, R33

ESC design files

The KiCad project lives in the someonelse20/ESC repository on GitHub; these links point at the commit this page was built from.

ESC: common questions

What microcontroller does the ESC use?

The ESC is built around the STM32G431CBTx, from the STM32 family.

How big is the ESC PCB?

The ESC measures 65 × 30 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the ESC?

89 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESC design files?

From the someonelse20/ESC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESC design in my own project?

The repository has no license, so all rights stay with someonelse20. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards