Record
sphawes·voltavox·pcb/record/record.kicad_pcb
About the Record PCB
Record is an open source PCB design by sphawes, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 90 × 90 mm, with 20 components from 11 distinct parts.
By type, the board carries 10 connectors and 10 jumpers.
It belongs with the wearables, power & battery and audio designs in this gallery.
From the project
PCB-based phonograph "badge"
Made primarially from PCBs, you can take a tiny PCB record, place it on the platter, place the needle on the record, and a song begins to play! Put a different record on, and as expected, you'll get a different song.
Voltavox is based heavily on the Adafruit Audio FX Sound Board. Using arturo182's FlexyPins and some castellated edges on the record PCBs, each record selectively pulls a different control pin on the Audio FX board to ground, choosing a different track. Dropping the needle onto the record completes the circuit and starts playing the audio. The horn is also comprised of PCBs…

Record bill of materials (BOM)
20 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FX_0 | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | J2 |
| 1 | FX_1 | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | J3 |
| 1 | FX_2 | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | J4 |
| 1 | FX_3 | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | J5 |
| 1 | FX_4 | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | J6 |
| 1 | FX_5 | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | J7 |
| 1 | FX_6 | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | J8 |
| 1 | FX_7 | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | J9 |
| 1 | FX_8 | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | J10 |
| 1 | FX_9 | TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile | J11 |
| 10 | Jumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 +2 |
Record design files
The KiCad project lives in the sphawes/voltavox repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/record/record.kicad_pcb
- Schematicpcb/record/record.kicad_sch
Record: common questions
How big is the Record PCB?
The Record measures 90 × 90 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Record?
20 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Record design files?
From the sphawes/voltavox repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Record design in my own project?
Yes, under the terms of its GPL-3.0 license, which sphawes chose for the repository.
More boards in voltavox
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkDriver
scottbez1
198.1 × 30.5 mm58 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k