ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor
spyral98·ARM-Development-System-to-Support-Digital-Twin-of-Stepper-Motor·PCB Development/STM32_Edge_Computing_Device.kicad_pcb
About the ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor PCB
ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor is an open source STM32 PCB design by spyral98, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 110 × 80 mm, with 120 components from 40 distinct parts.
Its main chip is the STM32L4S9ZIT6, from the STM32 family. Other key parts include the TL1963A-33KTTR, CM1231-02SO and DMPH4015SSS-13. By type, the board carries 53 resistors, 27 capacitors, 17 connectors, 8 jumpers, 4 ICs and 4 diodes.
It belongs with the robotics & motion designs in this gallery.
From the project
This repository consists of the work conducted for the thesis "ARM Development System to Support Digital Twin of Stepper Motor". It contains all the files necessary for the development of a fully function system built around an STM32 Cortex-M4 microcontroller as well as the code for a demo application for it.
Main components on the ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor
ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor bill of materials (BOM)
120 components, 40 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL1963A-33KTTR | TL1963A33KTTR | U1 |
| 1 | CM1231-02SO | SOT95P280X145-6N | U2 |
| 1 | DMPH4015SSS-13 | SOIC127P600X170-8N | U3 |
| 1 | STM32L4S9ZIT6 | LQFP-144_20x20mm_P0.5mm | U4 |
| 2 | TSW-202-07-F-S | HDRV2W64P254X508_1X2_762X241X838P | J1, J3 |
| 1 | 10118194-0001LF | USB_Micro-B_Amphenol_10118194_Horizontal | J2 |
| 4 | 90136-2106 | 901362106 | J5, J6, J7, J8 |
| 1 | 1935187 | 1935187 | J9 |
| 2 | SSQ-108-01-F-S | RHDR8W64P254_1X8_2083X241X851P | J10, J11 |
| 1 | SSQ-101-01-T-S | SSQ-101-XX-YYY-S | J12 |
| 1 | SSQ-102-01-T-S | RHDR2W64P254_1X2_559X241X851P | J13 |
| 2 | 90136-2107 | 901362107 | J14, J15 |
| 1 | SSQ-104-01-L-D | SSQ-104-XX-YYY-D | J16 |
| 1 | 90136-2103 | 901362103 | J17 |
| 1 | 90136-2104 | 901362104 | J18 |
| 1 | SF-0603HIA100M-2 | Fuse_0603_1608Metric | F1 |
| 1 | SF-0603HIA300M-2 | Fuse_0603_1608Metric | F2 |
| 8 | 2SN-BK-G | PinHeader_1x03_P2.00mm_Vertical | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 1 | DTSZML-62K-V-T/R | SW_Push_1P1T_NO_6x6mm_H4.5mm | SW1 |
| 1 | SSSS811101 | SSSS811101 | SW2 |
Show 20 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 7M-12.000MEHE-T | Crystal_SMD_3225-4Pin_3.2x2.5mm_custom | XTAL1 |
| 2 | RSX101MM-30TFTR | RSX101MM30TFTR | D1, D2 |
| 1 | AP2012MGC | LED_0805_2012Metric | D3 |
| 1 | SML-LXT0805SIUGUBW | SMLLXT0805SIUGUBW | D4 |
| 2 | FBTH1608HE101-T | L_0603_1608Metric | FB1, FB2 |
| 2 | 10u | C_0805_2012Metric | C1, C2 |
| 1 | 2.2u | C_0805_2012Metric | C3 |
| 16 | 100n | C_0603_1608Metric | C4, C6, C10, C11, C12, C13, C14, C15 +8 |
| 3 | 1u | C_0805_2012Metric | C5, C9, C23 |
| 2 | 4.7u | C_0805_2012Metric | C7, C8 |
| 1 | 10n | C_0603_1608Metric | C24 |
| 2 | 15p | C_0603_1608Metric | C25, C26 |
| 4 | 0 | R_0805_2012Metric | R0, R37, R38, R39 |
| 4 | 1k | R_0603_1608Metric | R1, R13, R14, R15 |
| 4 | 10k | R_0603_1608Metric | R2, R16, R51, R52 |
| 1 | 2 | R_0603_1608Metric | R3 |
| 8 | 4.7k | R_0603_1608Metric | R4, R5, R6, R7, R8, R9, R10, R11 |
| 1 | 910 | R_0603_1608Metric | R12 |
| 30 | 22 | R_0805_2012Metric | R17, R18, R19, R20, R21, R22, R23, R24 +22 |
| 1 | 330 | R_0603_1608Metric | R50 |
ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor design files
The KiCad project lives in the spyral98/ARM-Development-System-to-Support-Digital-Twin-of-Stepper-Motor repository on GitHub; these links point at the commit this page was built from.
ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor: common questions
What microcontroller does the ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor use?
The ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor is built around the STM32L4S9ZIT6, from the STM32 family.
How big is the ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor PCB?
The ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor measures 110 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor?
120 components, from 40 distinct parts. The full bill of materials is listed on this page.
Where can I download the ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor design files?
From the spyral98/ARM-Development-System-to-Support-Digital-Twin-of-Stepper-Motor repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor design in my own project?
Yes, under the terms of its GPL-3.0 license, which spyral98 chose for the repository.
Can I test firmware for the ARM-Development-System to-Support-Digital-Twin of-Stepper-Motor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k