SSatH
SSatH·SSatH·04-Layout/SS@H001/SS@H001-0/SS@H001.kicad_pcb
About the SSatH PCB
SSatH is an open source PCB design by SSatH, published on GitHub under the Custom license license. It is a 2-layer board measuring 15 × 30 mm, with 34 components from 23 distinct parts.
Other key parts include the LTC4067, KL03 and TPS62740. By type, the board carries 10 resistors, 8 capacitors, 6 connectors, 4 jumpers, 3 ICs and 1 transistor.
From the project
In this folder you can find the boards design files of project. In particular the projects are: SS@H001 SS@H002 SS@H003 SS@H004 - Tech garden control node. * SS@H005 - Tech garden sensor node.
Main components on the SSatH
SSatH bill of materials (BOM)
34 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC4067 | Dfn-12 | U1 |
| 1 | KL03 | Qfn-24 | U2 |
| 1 | TPS62740 | Wson-12 | U3 |
| 1 | MMBF170 | SOT23 | Q1 |
| 1 | 32.768KHZ | Qtc2 | X1 |
| 1 | MICRO-USB | MICRO-USB-B | P1 |
| 1 | SWD | 5x2-1.27mm-Tht | P2 |
| 2 | CONN_10 | 10x1-1.27mm-Tht | P3, P4 |
| 1 | CONN_7 | 7x1-1.27mm-Tht | P5 |
| 1 | BATT | 2x1-1.27mm-Tht | P6 |
| 4 | JUMPER-3 | JUMPER-3C | JP2, JP3, JP4, JP5 |
| 1 | 2.2uH | 0805 | L1 |
| 3 | 10uF | 0603 | C1, C8, C9 |
| 3 | 100nF | 0402 | C2, C4, C5 |
| 1 | 1uF | 0402 | C3 |
| 1 | 10uF | 0402 | C6 |
| 3 | 10k | 0402 | R1, R2, R22 |
| 1 | 3.9k | 0402 | R3 |
| 1 | 4.7k | 0402 | R4 |
| 1 | 100k | 0402 | R5 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0 | 0402 | R12 |
| 2 | 200k | 0402 | R15, R16 |
| 1 | 1M | 0402 | R18 |
SSatH design files
The KiCad project lives in the SSatH/SSatH repository on GitHub; these links point at the commit this page was built from.
SSatH: common questions
How big is the SSatH PCB?
The SSatH measures 15 × 30 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SSatH?
34 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the SSatH design files?
From the SSatH/SSatH repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the SSatH design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.