Sb cdh

starbelt·sb-cdh·kicad/sb-cdh.kicad_pcb

Sb cdh PCB layout, top view — open source STM32 board by starbelt

About the Sb cdh PCB

Sb cdh is an open source STM32 PCB design by starbelt, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 43 × 43 mm, with 42 components from 23 distinct parts.

Its main chip is the STM32L496VGT3, from the STM32 family. Other key parts include the IS25LP128F-JBLA3 and TLV73333PQDBVRQ1. By type, the board carries 14 capacitors, 9 connectors, 8 resistors, 3 ICs, 2 crystals and 2 LEDs.

From the project

Starbelt command and data handling (CDH) printed circuit board (PCB)

sb-cdh.pretty: Footprint directory fp-lib-table: Footprint library table sb-cdh.kicadpcb: KiCad PCB layout sb-cdh.kicadprl: KiCad project preferences sb-cdh.kicadpro: KiCad project file sb-cdh.kicadsch: KiCad schematic layout sb-cdh.kicadsym: KiCad symbol library sym-lib-table: Symbol library table README.md: This document

Main components on the Sb cdh

Sb cdh bill of materials (BOM)

42 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32L496VGT3
IC1
1
IS25LP128F-JBLA3
IC2
1
TLV73333PQDBVRQ1
IC3
1
DMG2305UXQ-7
Q1
1
ABM8AIG-16.000MHz-12-2Z-T
Y1
1
ABS07AIG-32.768KHZ-T
Y2
1
CLP-109-02-L-D-P-TR
J1
1
DX07S016JA1R1500
J2
2
CES-116-02-G-S
J3, J4
4
CES-104-02-G-S
J5, J6, J7, J8
1
Conn_01x04
J9
1
PTS810SJK250SMTR LFS
PTS810SJK250SMTR_LFS
S1
2
SML-D12P8WT86C
LED1, LED2
1
BAT54SQ-7-F
D1
1
BAT54W-HG3-18
D2
1
GRT188C71C475KE13D
C1
8
0603YC104K4T2A
C2, C3, C4, C5, C6, C7, C8, C9
4
GCM1885C2A200JA16D
C10, C11, C12, C13
1
597D158X9004R2T
C14
2
CRCW0603100RFKEAHP
R1, R2
Show 3 more
QtyPartRefs
2
SG73S1JTTD1002F
R3, R4
2
SG73S1JTTD1001F
R5, R6
2
SG73P1JTTD5101F
R7, R8

Sb cdh design files

The KiCad project lives in the starbelt/sb-cdh repository on GitHub; these links point at the commit this page was built from.

Sb cdh: common questions

What microcontroller does the Sb cdh use?

The Sb cdh is built around the STM32L496VGT3, from the STM32 family.

How big is the Sb cdh PCB?

The Sb cdh measures 43 × 43 mm, has 4 copper layers and is 1.5422 mm thick.

How many components are on the Sb cdh?

42 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sb cdh design files?

From the starbelt/sb-cdh repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Sb cdh design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which starbelt chose for the repository.

Can I test firmware for the Sb cdh without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards