Wiimote
stonedDiscord·Wiimote
About the Wiimote PCB
Wiimote is an open source PCB design by stonedDiscord, published on GitHub under the MIT license. It is a 4-layer board measuring 142.2 × 29.6 mm, with 148 components from 43 distinct parts.
Other key parts include the Mitsumi 5K, R1210N311C, M24128, ADXL330 and U5. By type, the board carries 62 capacitors, 35 resistors, 11 ICs, 9 diodes, 5 switches and 5 inductors.
From the project
Wii Remote KiCAD files
Main components on the Wiimote
Wiimote bill of materials (BOM)
148 components, 43 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Mitsumi 5K | U1-9 | U1 |
| 1 | R1210N311C | SOT-23-5 | U2 |
| 1 | M24128 | TSSOP-8_4.4x3mm_P0.65mm | U3 |
| 1 | ADXL330 | QFN-16-1EP_4x4mm_P0.65mm_EP2.5x2.5mm | U4 |
| 1 | U5 | SSOP-16_3.9x4.9mm_P0.635mm | U5 |
| 1 | U6 | SSOP-16_4.4x5.2mm_P0.65mm | U6 |
| 1 | U7 | VSSOP-8_3x3mm_P0.65mm | U7 |
| 1 | BCM2042 | BGA | U8 |
| 1 | U9 | U1-9 | U9 |
| 1 | U10 | SOT65P205X100-3N | U10 |
| 1 | U11 | SOT65P205X100-3N | U11 |
| 1 | DRC5114T | SOT-523 | Q2 |
| 1 | Y | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y0 |
| 1 | JUMPER | JUMPER | J1 |
| 1 | J3 | J3 | J3 |
| 2 | BAT | BAT | B+0, B-0 |
| 1 | CAMERA | CAMERA | CAMERA0 |
| 1 | NNCD6.8 | SOT-665 | DA2 |
| 1 | EXT | EXT | EXT0 |
| 1 | Fuse | 0603 | F1 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | F0603 | Fuse_0603_1608Metric | F2 |
| 1 | F1206 | Fuse_1206_3216Metric | F3 |
| 6 | FIL0603 | 0603 | FIL1, FIL2, FIL3, FIL4, FIL5, FIL6 |
| 1 | MOTOR | MOTOR | MOTOR0 |
| 2 | SPK_PAD | SPK_PAD | SPK1, SPK2 |
| 1 | BT+ | BTN_TACT | SW5 |
| 1 | BT- | BTN_TACT | SW10 |
| 1 | BTH | BTN_TACT | SW11 |
| 1 | SYNC_BTN | SW_PUSH_6mm_H13mm | SW12 |
| 1 | BTP | BTN_TACT | SW13 |
| 1 | RSX101VA-30 | D_TUMD2 | D1 |
| 3 | DIODE | D_0603_1608Metric | D2, D9, D10 |
| 1 | MA3X704D | SOT-416 | D3 |
| 4 | LED0603 | LED_0603_1608Metric | D5, D6, D7, D8 |
| 3 | L | L_2010_5025Metric | L3, L6, L7 |
| 2 | FIL0402 | 0402 | L12, L13 |
| 41 | C0402 | C_0402_1005Metric | C1, C2, C3, C4, C7, C8, C9, C11 +33 |
| 7 | C0603 | C_0603_1608Metric | C5, C6, C13, C22, C24, C26, C39 |
| 12 | C0805 | C_0805_2012Metric | C10, C14, C18, C20, C21, C29, C30, C31 +4 |
| 1 | C1206 | C_1206_3216Metric | C49 |
| 1 | 4V 3300uF | CP_Radial_D10.0mm_P5.00mm | C55 |
| 33 | R0402 | R_0402_1005Metric | R2, R3, R4, R5, R6, R8, R9, R10 +25 |
| 2 | R0603 | R_0603_1608Metric | R37, R39 |
Wiimote design files
The KiCad project lives in the stonedDiscord/Wiimote repository on GitHub; these links point at the commit this page was built from.
- LayoutWiimote.kicad_pcb
- SchematicWiimote.kicad_sch
Wiimote: common questions
How big is the Wiimote PCB?
The Wiimote measures 142.2 × 29.6 mm, has 4 copper layers and is 1.600198 mm thick.
How many components are on the Wiimote?
148 components, from 43 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wiimote design files?
From the stonedDiscord/Wiimote repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Wiimote design in my own project?
Yes, under the terms of its MIT license, which stonedDiscord chose for the repository.