RFID
stops-top·RFID·src/KiCad/PN532.kicad_pcb
About the RFID PCB
RFID is an open source PCB design by stops-top, published on GitHub. It is a 2-layer board measuring 40 × 40 mm, with 44 components from 21 distinct parts.
Other key parts include the PN532. By type, the board carries 19 capacitors, 15 resistors, 6 diodes, 2 inductors, 1 IC and 1 crystal.

Main components on the RFID
RFID bill of materials (BOM)
44 components, 21 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PN532 NXP Semiconductors | QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm | U1 |
| 1 | 27.12MHz ABRACON | Crystal-3.4x2.7 | Y1 |
| 1 | G Wurth Elektronik | STP_156120xx7530 | D1 |
| 1 | A Wurth Elektronik | STP_156120xx7530 | D2 |
| 1 | R Wurth Elektronik | STP_156120xx7530 | D3 |
| 3 | BAV99S Nexperia | SOT-363_SC-70-6 | D4, D5, D6 |
| 2 | 560nH Murata Electronics | L_1206_1008 | L1, L2 |
| 2 | 160pF 1% KEMET | Cx2_0603 | C1, C2 |
| 2 | 22pF 1% Walsin | C_0603 | C3, C4 |
| 2 | 220pF | C_0603 | C5, C6 |
| 6 | 0.1uF | C_0603 | C7, C9, C11, C12, C14, C18 |
| 1 | 1nF 2% Vishay / Vitramon | C_0603 | C8 |
| 3 | 4.7uF | C_0603 | C10, C13, C15 |
| 2 | 22pF | C_0603 | C16, C17 |
| 1 | 33pF | C_0603 | C19 |
| 3 | 0R | Hidden | R1, R2, R3 |
| 1 | 2K7 1% YAGEO | R_0603 | R4 |
| 1 | 1K 1% Vishay / Dale | R_0603 | R5 |
| 3 | 10K | R_0603 | R6, R11, R15 |
| 1 | 20K YAGEO | R_0603 | R7 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 100R | R_0603 | R8, R9, R10, R12, R13, R14 |
RFID design files
The KiCad project lives in the stops-top/RFID repository on GitHub; these links point at the commit this page was built from.
- Layoutsrc/KiCad/PN532.kicad_pcb
- Schematicsrc/KiCad/PN532.kicad_sch
RFID: common questions
How big is the RFID PCB?
The RFID measures 40 × 40 mm, has 2 copper layers and is 0.8 mm thick.
How many components are on the RFID?
44 components, from 21 distinct parts. The full bill of materials is listed on this page.
Where can I download the RFID design files?
From the stops-top/RFID repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RFID design in my own project?
The repository has no license, so all rights stay with stops-top. Use it as a reference, and ask the author before reusing the design.