Stm8l dev

suuppl·stm8l-dev·electronics/hw/stm8l-dev.kicad_pcb

Stm8l dev PCB layout, top view — open source STM32 board by suuppl

About the Stm8l dev PCB

Stm8l dev is an open source STM32 PCB design by suuppl, published on GitHub under the EUPL-1.2 license. It is a 4-layer board measuring 44.5 × 71.1 mm, with 33 components from 22 distinct parts.

Its main chip is the STM8L151C8, from the STM32 family. Other key parts include the AMS1117-3.3. By type, the board carries 11 capacitors, 7 resistors, 3 connectors, 3 switches, 3 LEDs and 2 ICs.

From the project

Hier wird einmal kurz das Projekt beschrieben

Hier wird einmal kurz das Projekt beschrieben

Hier kommen Entwicklungsnotizen hin, z.B. zur Bauteilauswahl

Main components on the Stm8l dev

STM8L151C8AMS1117-3.3

Stm8l dev bill of materials (BOM)

33 components, 22 distinct parts.

QtyPartRefs
1
STM8L151C8
U101
1
AMS1117-3.3
U102
1
16MHz 9pF
X101
1
32.768kHz 12.5pF
Y101
2
Conn_02x24_Odd_Even
J101, J102
1
SWIM
J103
1
BTN_{usr1}
SW101
1
BTN_{~{RST}}
SW102
1
BTN_{usr2}
SW103
1
LED_{usr2}
LED101
1
LED_{pwr}
LED102
1
LED_{usr1}
LED103
2
B5819W
D101, D102
3
10nF
C101, C103, C105
3
1uF
C102, C104, C106
1
22uF
C107
2
12.5pF
C108, C109
2
9pF
C110, C111
1
47kR
R101
1
91kR
R102
Show 2 more
QtyPartRefs
3
300R
R103, R104, R105
2
10kR
R106, R107

Stm8l dev design files

The KiCad project lives in the suuppl/stm8l-dev repository on GitHub; these links point at the commit this page was built from.

Stm8l dev: common questions

What microcontroller does the Stm8l dev use?

The Stm8l dev is built around the STM8L151C8, from the STM32 family.

How big is the Stm8l dev PCB?

The Stm8l dev measures 44.5 × 71.1 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Stm8l dev?

33 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stm8l dev design files?

From the suuppl/stm8l-dev repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Stm8l dev design in my own project?

Yes, under the terms of its EUPL-1.2 license, which suuppl chose for the repository.

Can I test firmware for the Stm8l dev without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards