HTH-General-Badge

syn-ack-zack·HTH-General-Badge·KiCad_HTH/HTHBadgeFinal.kicad_pcb

HTH-General-Badge PCB layout, top view — open source board by syn-ack-zack

About the HTH-General-Badge PCB

HTH-General-Badge is an open source PCB design by syn-ack-zack, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 69.9 × 161.8 mm, with 13 components from 8 distinct parts.

Other key parts include the V_REG_MIC2920. By type, the board carries 4 crystals, 4 capacitors, 1 IC, 1 connector, 1 switch and 1 diode.

It belongs with the wearables designs in this gallery.

From the project

The general attendee badge for Hackers Teaching Hackers 2019

The general attendee badge for HTH 2019 was a PCB with the necessary circuit to allow for a USB or battery powered Shitty Add-On (SAO) Totem badge supporting up to 4 diferent add-ons. The necessary components to enable your badge to be powered can be found in the bill of materials.

Included in this repository are the necessary KiCad files for modifying this design and creating the necessary outputs for manufacturing. The gerber files for fabrication have been included as well for your convenience.

HTH-General-Badge, from the project README
From the project README

Main components on the HTH-General-Badge

HTH-General-Badge bill of materials (BOM)

13 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
V_REG_MIC2920
U1
4
Badgelife_sao_connector_v169bis
X1, X2, X3, X4
1
10118194-0001LF
J1
1
2xAA
B1
1
DPDT
SW1
1
D_Schottky
D1
2
CP1
C1, C4
2
C
C2, C3

HTH-General-Badge design files

The KiCad project lives in the syn-ack-zack/HTH-General-Badge repository on GitHub; these links point at the commit this page was built from.

HTH-General-Badge: common questions

How big is the HTH-General-Badge PCB?

The HTH-General-Badge measures 69.9 × 161.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HTH-General-Badge?

13 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the HTH-General-Badge design files?

From the syn-ack-zack/HTH-General-Badge repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the HTH-General-Badge design in my own project?

Yes, under the terms of its GPL-3.0 license, which syn-ack-zack chose for the repository.

Similar boards