2-channel-EEG
t3rwin·2-channel-EEG·KiCad/2-channel-EEG.kicad_pcb
About the 2-channel-EEG PCB
2-channel-EEG is an open source PCB design by t3rwin, published on GitHub. It is a 4-layer board measuring 84.1 × 43.9 mm, with 92 components from 37 distinct parts.
Other key parts include the PESE1-S5-S5-M-TR, AD8237, AD8606, TCR2EF33 and MCP3562R. By type, the board carries 33 resistors, 30 capacitors, 12 ICs, 11 connectors, 2 jumpers and 1 switch.
From the project
EEG Neurofeedback Senior Project
Main components on the 2-channel-EEG
2-channel-EEG bill of materials (BOM)
92 components, 37 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PESE1-S5-S5-M-TR | CONV_PESE1-S5-S5-M | U1 |
| 2 | AD8237 | MSOP-8_3x3mm_P0.65mm | U2, U3 |
| 6 | AD8606 | MSOP-8_3x3mm_P0.65mm | U4, U5, U7, U8, U9, U11 |
| 1 | TCR2EF33 | IC_TC4S584F_LF | U6 |
| 1 | MCP3562R | TSSOP-20_4.4x6.5mm_P0.65mm | U10 |
| 1 | ISO6763-Q1 | SOIC-16W_7.5x10.3mm_P1.27mm | U12 |
| 1 | Power_Input | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Nucleo_3.3 | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Electrode_Input | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | GND_select | PinHeader_2x02_P2.54mm_Vertical | J4 |
| 2 | Conn_02x01 | PinHeader_2x01_P2.54mm_Vertical | J5, J6 |
| 1 | VGND | PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | ADC_Data | PinHeader_1x06_P2.54mm_Vertical | J9 |
| 1 | ISO_IN_C | PinHeader_1x01_P2.54mm_Vertical | J10 |
| 1 | MCU_Data | PinHeader_1x06_P2.54mm_Vertical | J11 |
| 2 | SolderJumper_2_Open | R_0603_1608Metric | JP1, JP2 |
| 2 | 10k | TRIM_35WR10KLFTR | RV1, RV2 |
| 1 | SW_Push_SPDT | SW_JS102011SCQN | SW1 |
| 1 | ~ | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
Show 17 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C1779 4.7u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 15 | C49678 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C7, C8, C9, C10, C11, C15 +7 |
| 8 | C15850 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C16, C17, C19, C20, C25 |
| 3 | C28323 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C28, C29 |
| 2 | C53134 47n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14 |
| 1 | C46653 1n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C22 |
| 5 | C17514 1M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R21, R30, R31 |
| 4 | C17513 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R12, R13 |
| 2 | C17662 3M | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6 |
| 4 | C104412 56.2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9, R10 |
| 1 | C17734 510 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11 |
| 2 | C149504 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R14, R15 |
| 4 | C17414 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R16, R17, R22, R23 |
| 2 | C17408 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19 |
| 1 | 0 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R20 |
| 6 | C17415 10 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R24, R25, R26, R27, R28, R29 |
| 2 | Matched_10K_Resistor_Array_2x | R_Array_Matched_2x0606 | RN1, RN2 |
2-channel-EEG design files
The KiCad project lives in the t3rwin/2-channel-EEG repository on GitHub; these links point at the commit this page was built from.
2-channel-EEG: common questions
How big is the 2-channel-EEG PCB?
The 2-channel-EEG measures 84.1 × 43.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the 2-channel-EEG?
92 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2-channel-EEG design files?
From the t3rwin/2-channel-EEG repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 2-channel-EEG design in my own project?
The repository has no license, so all rights stay with t3rwin. Use it as a reference, and ask the author before reusing the design.